Using
your
Converse 320
Emergency calls
The emergency services can
be contacted by dialling 999
or 112.
If your Converse 320 is
connected to a switchboard
or PBX, you might have to
dial another number before
999 or 112 in order to get
an outside line.
On some switchboards,
you may not be able to get
an outside line if the power
fails. Check with your
switchboard operator or
communications manager.
To make a call
Lift the handset off the
base and dial the number
you want. The display
shows the number dialled.
At the end of your call,
replace the handset.
To use Handsfree
You can make and receive
calls without lifting the
handset by pressing the
Handsfree button.
To make a call:
Press the Handsfree button.
You hear the dialling tone.
Dial the number you want.
The display shows the
number dialled.
When your call is answered,
either lift the handset or
speak in ‘handsfree’ mode.
To receive a call:
When the phone rings,
press the Handsfree button
and speak to answer the call.
To make a call using
the Dial button
Without lifting the handset,
dial the number you want.
The display shows the
number to be dialled.
If you make a mistake, use
the
䊴
Clear button to edit the
number you have entered.
The Next
䊳
button inserts a
space when storing names
and numbers.
Press the Dial button.
The number shown in the
display is dialled in
‘handsfree’ mode.
Note
There are 3 ways to make a
call on your Converse 320:
by lifting the handset, using
the Handsfree button or by
using the Dial button.
For simplicity, only the
‘handsfree’ method is used
throughout the rest of this
guide. You may still use the
other methods if you wish.
Using a headset
Converse headsets (RJ11
jack) are available
separately from BT shops or
by calling
Freefone 0800
800 150.
Plug the headset into the
socket marked HEADSET
on the underside of the
base.
To make a call, press the
Headset button.
Dial the phone number.
To end the call, press the
Headset button.
To use the
Secrecy button
You can prevent your
caller from hearing you
while you talk to someone
else close by.
During a call, press the
Secrecy button.
The red Secrecy light
comes on. Your caller
cannot hear you.
To resume your
conversation, press the
Secrecy button again.
The Secrecy light goes off.
1
2
3
1
2
3
1
2
3
