Manual BT Concero 1400 (page 6 of 51) (English)

650260

Zoom out

Zoom in

1/51

If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp

Battery low warning

If the

symbol is ﬂashing, you will

need to recharge your handset before

using it.

If the battery icon is ﬂashing and

scrolling digits

the battery is

very low and you will need to charge

it for 24 hours before use to ensure

maximum battery performance.

Battery performance

To keep your batteries in the best

condition, leave the handset off the

base for a few hours at a time (after

the initial 24 hour charge).

New NiMH batteries do not reach

full capacity until they have been in

normal use for several days. Running

the batteries right down at least once

a week will help them last as long

as possible.

IMPORTANT

Only use the power supply and

telephone line cord supplied with

your BT Concero 1400 otherwise the

telephone may not work.

Under no circumstances use

non-rechargeable batteries. Only

use NiMH rechargeable batteries

with a capacity of 500mAh. Using

inappropriate batteries will invalidate

your guarantee and may damage

the telephone.

The charge capacity of rechargeable

batteries will reduce with time as

they wear out, so reducing the

talk/standby time of the handset.

Eventually they will need to be

replaced. New batteries can be

obtained from the BT Concero

Helpline 0800 218 2182*.

Batteries and handset may become

warm during charging. This is normal.

If you have more than one handset

registered to your base, you only

need to set the date and time on one

handset and the other handsets will

be automatically updated.

3. Place the handset on the base to charge the batteries for

at least 24 hours.

The main handset is pre-registered to the base as Handset 1.

This is shown on the display. When the handset is fully charged

the display shows the

symbol.

4. After 24 hours plug the telephone line cord into the telephone

wall socket.

Note: If you ever need to remove the batteries, simply slide open

the battery compartment cover and using the ﬁnger holes grip

the batteries and pull them out.

Set the time format: 24 or 12hr

1. Press the

button to open the main menu.

2. Press

until the display shows hS SeTTingS and press

soft key. DaTe & TiMe is displayed, press the

soft key again.

TiMe FOrMaT is displayed. Press the soft key and the

current format is displayed. Press

to change

between 24hr and 12hr. Press the

soft key, you will hear a

conﬁrmation tone.

4. Press the

button to return to standby.

How do I delete a name from my phone book list as there are no instructions in the user guide. The only info is for adding a new contact . Submitted on 29-4-2020 at 16:21
Reply Report abuse
- Go to Manual BT Concero 1400 page 21 at
  
  link Answered on 28-3-2021 at 12:29
  Vote up Report abuse
How do I stop calls going to answering machine after two rings Submitted on 12-4-2020 at 13:45
Reply Report abuse
Both main and second phone displaying 'SEARCHING'constantly. I cannot receive or make calls. Why is this? Submitted on 26-3-2020 at 13:34
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BT Concero 1400 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BT Concero 1400

BT Concero 1400 Quick start guide - English - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BT Concero 1400 Manual

Product: