735061
8
Zoom out
Zoom in
Previous page
1/22
Next page
Indirect measurement
Use indirect measurement to calculate the height of an object or the distance between two remote points. Note that
all three measurement points should be in one line and one point at right
angle to the laser beam.
1. Press button (15) twice; a triangle symbol will appear on the display.
2. Take three successive measurements on measuring points in a single
line.
3. Refer to the following illustrations for measurement type:
Fault description
Any errors will be shown as numeric codes on the display. The following table describes the numeric codes and
possible remedy.
Code
Error
Remedy
204 Calculation error Repeat measurement
208 Excess electrical current Contact the manufacturer
220 Insufficient voltage Change the batteries
252 Temperature too high Leave the unit to cool down to 0–40°C
253 Temperature too low Warm the unit up to 0–40°C
255
256
261
500
Weak signal, measurement time too
long
Received signal too strong
Out of the range of measurement
Hardware error
Use the reflector card included or ensure effective surface
reflection
Use target plate or do not aim at string light object
Select distance within the measuring range
Switch ON/OFF several times. If code still appears, contact
our service department.
2-Year Warranty
The warranty period for this device begins on the day of purchase. The purchase date must be proved by sending
us the original receipt.
We uphold the following during the warranty period:
Repair of possible failures free of charge
Replacement of all damaged parts free of charge
Including free expert service (i.e. free assembly by our authorized personnel)
All of the above is provided that the error cannot be linked to negligent handling.
Should you have any queries or quality problems, please contact the manufacturer immediately:
Brüder Mannesmann Werkzeuge GmbH
Abt. Reparatur-Service
Lempstraße 24
D-42859 Remscheid
Telephone: +49 2191/37 14 71
Fax: +49 2191/38 64 77
Email: service@br-mannesmann.de
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bruder Mannesmann 99995 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bruder Mannesmann 99995 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info