Manual Bruder Mannesmann 1595 (page 11 of 27) (English, German)

666606

Zoom out

Zoom in

1/27

Changing the jaws

The jaws in your riveter are dirty or worn if you need to pull the trigger several times for the

riveter to work. The jaws may also be dirty or worn if they fail to grip the rivet pin when you pull

the trigger. In this case, you will need to replace the jaws.

1. Screw the frame head off by turning it anticlockwise using the spanner included. Remove

the whole frame head.

2. Loosen the jaw case. Lock the jaw case end using a 23 mm jaw spanner. Remove the

whole jaw case, making sure that the jaw case and jaw pusher do not jump out under

spring pressure.

3. Clean the jaws using a wire brush and mild detergent or similar. Replace the jaws if their

teeth are worn. Clean all of the parts thoroughly.

4. Drop a little oil on the round side of the jaws and insert them back into the jaw case.

Assembly

1. Mount the jaw case onto the riveter as above in reverse order, then tighten up all of the

parts.

2. Always check the gap between the jaw case front and end before use.

3. Hold the spanner gauge against the

assembled jaw case. The jaw case is correctly

assembled if the spanner gauge fits onto the

air hydraulic riveter as shown here. If not,

tighten or loosen the jaw case until you reach

the right gap width.

Lubrication

Pneumatic tools always require sufficient lubrication. The most reliable continuous way of

lubricating an air tool is by using a mist lubricator. However, the hose should not be more than

10 m in length if the lubricator is centrally mounted on the compressor or fastened to the end of

the compressed air tubing – the mist will dissipate in the air and the oil will begin to collect in a

longer hose before it can reach the tool itself.

Lubricator setting

Hose up to 5 m Every 2 minutes 1 drop

Hose up to 10 m Per minute 1 drop

If you do not own a mist lubricator, always add a few drops of oil onto the compressed air

connector before you use the tool. Lubricate the tool again after using it, especially if do not plan

to use the unit for an extended period. No other maintenance is needed.

Storage

• Keep the tool indoors in a dry place protected from dust and dirt at temperature between

10 and 30°C.

• Store the tool out of the reach of children and persons that require supervision.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bruder Mannesmann 1595 in the language / languages: English, German as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bruder Mannesmann 1595 Manual

Product: