666606
8
Zoom out
Zoom in
Previous page
1/27
Next page
Air hydraulic riveter
Art. No. 1595
User manual
Read this material before using this tool. Failure to do so can result in
serious injury.
Do not allow this tool to be used by persons suffering from reduced physical, sensory or
mental capabilities unless they are under instruction and supervision by trained
personnel.
Keep your air hydraulic riveter out of children’s reach or persons requiring supervision.
Never leave the riveter unattended.
Never point the riveter towards yourself or others.
Only use your air hydraulic riveter according to the instructions in this user manual. The
riveter is not intended for constant commercial use.
For your own safety, do not fasten the the compressed air hose directly to your riveter –
use the quick coupling included instead.
Always use a pressure reducer to set the working pressure.
Your riveter generates a sound pressure level of 89 dB (A) – use appropriate
hearing protection while using the riveter.
Wear protective clothing such as goggles and work gloves.
Do not use oxygen or flammable gases as energy sources – always use clean, dry
compressed air at a pressure of about 6.5 bar to operate your riveter. Exceeding the
maximum pressure of 8 bar will significantly shorten the life of the tool.
Always disconnect your riveter from the compressed air source when not in use and
before servicing (such as emptying the safety cap). Do not use your riveter without the
safety cap.
Check that of the connections and hoses are tightly connected and in good working
order. Loose hoses may cause serious injury. Only use safety couplings.
Check your air hydraulic riveter for damage; do not use the tool if damaged.
Do not block or cover the air vents.
Do not overreach, keep a secure footing and balance at all times.
Be attentive and watch what you are doing. Use your common sense and don’t rush it.
Do not use your riveter if you are tired or under the influence of drugs, alcohol or
medication. A momentary lapse in concentration while operating a tool may result in
serious injury.
Wear suitable close-fitting work clothing and sturdy shoes, and keep long hair in a
hairnet. Jewellery and loose clothing may get caught up in the tool.
Keep your work area tidy – untidiness invites accidents.
Make sure you work under good lighting.
Do not use your air hydraulic riveter in the presence of flammable liquids, gases or dust
that a spark could ignite.
Never carry the tool by the hose – hold it by its casing. Keep the grip dry and free of oil or
grease.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bruder Mannesmann 1595 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bruder Mannesmann 1595 in the language / languages: English, German as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info