604825
113
Zoom out
Zoom in
Previous page
1/120
Next page
111
4
The upper thread
breaks.
The upper thread was not threaded
correctly. (for example, the spool is
not installed correctly, the spool cap
is too big for the spool being used, or
the thread has come out of the needle
bar thread guide.)
Correct the upper threading. Use the
spool cap that best fits the size of the
spool being used.
page 25
There are knots or tangles in the
thread.
Remove any knots or tangles.
The needle is not appropriate for the
thread you are using.
Choose a needle that is appropriate
for the type of stitch.
page 31
The upper thread tension is too tight. Loosen the upper thread tension. page 43
The thread is tangled, for example, in
the race.
Remove the tangle thread. If the
thread is tangled in the race, clean the
race.
page 95, 99
The needle is bent or blunt. Replace the needle. page 32
The needle is incorrectly installed. Correctly install the needle. page 32
The area around the hole in the
needle plate is scratched.
Replace the needle plate.
Contact your retailer or the nearest
authorised service center.
The area around the hole in the
presser foot is scratched.
Replace the presser foot.
Contact your retailer or the nearest
authorised service center.
The bobbin case is scratched, or has a
burr on it.
Replace the bobbin case.
Contact your retailer or the nearest
authorised service center.
You have not used a bobbin that has
been designed for this machine.
Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.
page 17
The lower thread
is tangled or
breaks.
You have not wound the bobbin
thread properly.
Wind the bobbin thread properly. page 17
The bobbin is scratched or does not
turn smoothly.
Replace the bobbin.
The thread is tangled.
Remove the tangled thread and clean
the race.
page 95, 99
You have not used a bobbin that has
been designed for this machine.
Incorrect bobbins will not work
properly. Only use a bobbin that has
been designed for this machine.
page 17
Bobbin is set incorrectly. Reset the bobbin thread correctly. page 22, 23
The fabric is
wrinkled.
You have not threaded the upper thread
properly or fitted the bobbin properly.
Thread the upper thread and wind the
bobbin thread properly.
page 22, 23, 25
The spool or spool cap is incorrectly
installed.
Correctly install the spool or spool
cap.
page 26
You have not used the right
combination of fabric, thread and
needle.
Choose a thread and needle that are
appropriate for the type of fabric.
page 31
The needle is bent or blunt. Replace the needle. page 32
If thin fabrics are being sewn, the
stitch is too long or the fabric is not
being fed correctly.
Sew with the stabilizer material under
the fabric.
page 46
If thin fabrics are being sewn, the
stitch is too coarse.
Shorten the stitch length, or sew with
stabilizer material under the fabric.
page 40, 46
Symptom Possible cause How to put it right Reference
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XS3109 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XS3109 in the language / languages: English as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XS3109

Brother XS3109 Quick start guide - English, French, Portuguese, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info