Manual Brother XR27NT (page 18 of 52) (English)

631403

Zoom out

Zoom in

1/52

KNOWING YOUR SEWING MACHINE ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

—

————————————————————————————————————————————————

—————

Hold the end of the thread, push the

bobbin down with your finger, and then

pass the thread through the slit, as shown.

• If the thread is not correctly inserted through

the tension-adjusting spring of the bobbin

case, it may cause incorrect thread tension.

1 Tension-adjusting spring

While lightly holding down the bobbin

with your right hand as shown, guide the

thread through the slit (1 and 2). Then,

pull the thread toward you to cut it with

the cutter (3).

• At this time, check that the bobbin easily

rotates counterclockwise.

1 Slit

2 Cutter (Cut the thread with the cutter.)

Replace the bobbin cover. Put the

projection into the race retainer groove

and push closed.

1 Groove

2 Projection

• Start sewing after threading the lower and

upper thread. When sewing gathers or darts,

you can draw up the lower thread by hand so

that some thread will be left over. Refer to the

steps in “Drawing up the lower thread”

(page 22).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XR27NT in the language / languages: English as an attachment in your email.

The manual is 18,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XR27NT Manual

Product: