525945
77
Zoom out
Zoom in
Previous page
1/99
Next page
66
USING ATTACHMENTS AND APPLICATIONS
UTILISATION DES ACCESSOIRES ET LEURS APPLICATIONS
USO DE ACCESORIOS Y APLICACIONES
Appliques
Pattern Stitch Length
F-2
An applique is created by cutting a contrasting piece of fabric into
a shape to be used as a decoration on a garment or project.
1. Baste the cut design to the fabric in the location where desired.
2. Carefully sew around the edge of the cutout design with a Zigzag
Stitch in the fine stitch length.
3. Cut away the surplus fabric outside of the stitching.
4. Remove the basting, if necessary.
* If you use the Clear-view Foot, it is easy to see the fabric and to
produce more beautiful stitches.
NOTE:
Make reinforcing Straight Stitches at the beginning and the
end of the stitching to secure.
CAUTION
Be careful that the needle does not strike a basting pin
during sewing. Striking a pin can cause the needle to break,
resulting in injury.
Aplicaciones
Modelo de puntada Largo de puntada
F-2
Si queremos colocar un aplique de piel etc. que haga contraste, para
utilizarla como decoración en una prenda.
1. Hilvane la aplicación recortada al tejido, en donde desee ponerla.
2. Cosa cuidadosamente los bordes del diseño con una puntada
zigzag en un largo de puntada fino.
3. Recorte el tejido sobrante que quede fuera del pespunte.
4. Quite los hilvanes, si fuera necesario.
* Si utiliza el prensatelas transparente, le resultará fácil ver el tejido
y conseguir puntadas aun más bellas.
NOTA:
Haga unas puntadas rectas como refuerzo al principio y al final de las
puntadas para que no puedan deshacerse.
PRECAUCIÓN
Asegúrese de que la aguja no tropieza con los alfileres durante
la costura. Si tropieza con un alfiler, podría romperse la aguja y
causar lesiones.
Appliques
Modèle de point Longueur de point
F-2
Pour créer une applique, il suffit de découper un morceau dun tissu
contrastant et de lui donner la forme dune décoration à appliquer sur un
vêtement ou sur un ouvrage.
1. Faufiler le motif découpé à lendroit souhaité.
2. Coudre soigneusement le contour du motif en points zigzag avec une
fine longueur de point.
3. Couper la partie de tissu dépassant de la couture.
4. Défaufiler, si nécessaire.
* Avec le pied bonne vision, on peut mieux voir le tissu et produire de
meilleurs points.
REMARQUE:
Faire quelques points droits à chaque extrémité pour renforcer la couture.
ATTENTION
Assurez-vous que laiguille ne frappera pas d’épingles durant la
couture. Autrement laiguille pourrait casser et vous blesser.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XR-46C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XR-46C in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info