631388

Brother XL-5030 Manual

47
Zoom out
Zoom in
Previous page
1/82
Next page
39
CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
Zigzag Stitching
XL5030 XL5020 XL5010
Pattern Stitch Length Stitch Width
4 4 2 Zigzag Stitch Fixed 1.7
5 5 3 Zigzag Stitch -4 Fixed 3.5
6 6 4 Zigzag Stitch Fixed 5
ZIGZAG STITCH
Select the pattern number according to the desired stitch width you
require using the pattern selection dial. Then, select the stitch length.
It is recommended to sew using the Straight Stitch at the beginning and
end of the Zigzag Stitch.
SATIN STITCH
When the Zigzag Stitch length is set in the “ ” range, it produces a
satin stitch (a close zigzag stitch). The satin stitch can be used for mak-
ing buttonholes and decorative stitches. Set the pattern selection dial
to the desired Zigzag Stitch and set the stitch length in the “ ” range.
Puntadas zigzag
XL5030 XL5020 XL5010
Número de puntada
Largo de puntada
Ancho de puntada
4 4 2 Puntada zigzag Fija 1,7
5 5 3 Puntada zigzag -4 Fija 3,5
6 6 4 Puntada zigzag Fija 5
PUNTADA ZIGZAG
Seleccione el número de puntada de acuerdo con el ancho de la
puntada que requiera utilizando el selector del número de puntada.
Luego, seleccione el largo de puntada.
Se recomienda coser con puntada recta al principio y al final con
unas puntadas zigzag.
PUNTADA DE REALCE
Cuando se define el largo de la puntada en la parte “ ”, se coserán
las puntadas tupidas (puntada zigzag muy cerrada) que pueden ser-
vir para hacer ojales o como puntadas decorativas. Seleccione la
puntada zigzag. Luego ponga el largo de la puntada en la zona “ ” .
Punto zigzag
XL5030 XL5020 XL5010
Punto Lunghezza Ampiezza
4 4 2 Punto zigzag Fissa 1,7
5 5 3 Punto zigzag -4 Fissa 3,5
6 6 4 Punto zigzag Fissa 5
PUNTO ZIGZAG
Selezionare il punto in base all’ampiezza desiderata ruotando il selettore
dei punti. Quindi selezionare la lunghezza del punto.
Si consiglia eseguire una cucitura con il punto diritto prima e dopo il punto
zigzag.
PUNTO SATIN
Quando la lunghezza del punto zigzag è impostata nell’area “ ”, si ottiene
un punto satin (una successione di punti zigzag molto fitti). Il punto satin
può essere utilizzato per eseguire asole e punti decorativi. Disporre il selettore
dei punti sul punto zigzag desiderato e ruotare il selettore della lunghezza
del punto sull’area “ ”.
… 47 …


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-xl-5030

Reset search

  • I'm a complete notice, and need your help.
    I was using my sewing machine and the unit that holds the needle came off the main rod that moves up and down.. There seems to be a tiny alan screw, is that what holds it on the rod? Would need a tiny alan key..

    Thank you for any help..
    Kind regards
    Helen Submitted on 10-10-2020 at 20:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5030 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5030

Brother XL-5030 User Manual - German, Dutch, French - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info