Manual Brother XL-5030 (page 44 of 82) (English, Italian, Spanish)

631388

Zoom out

Zoom in

1/82

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Straight Stitching

XL5030 XL5020 XL5010

Pattern Stitch Length

2 2 5 Straight Stitch (Center needle position)

1-4

3 3 6 Straight Stitch (Left needle position)

12 10 13 Triple Stretch Stitch (Center needle position)

Fixed 2.5

13 11 14 Triple Stretch Stitch (Left needle position)

Starting Sewing

1. Turn the pattern selection dial to select the desired stitch. Set the

pattern selection dial to Straight Stitch or Triple Stretch Stitch for

the type of stitch required.

2. Raise the needle to its highest position and lift the presser foot lever.

3. Pull up the lower thread by turning the balance wheel toward you

(counterclockwise) and place both the upper and lower threads

behind the presser foot.

4. Place the fabric under the presser foot with the needle 1 cm (3/8")

from the edge of the fabric.

5. Lower the presser foot.

Backtacking

Reverse stitching is used to lock or reinforce the end of the stitch.

6. Press down on the reverse sewing lever as far as possible, then

lightly step on the foot controller. Sew 5 to 10 stitches in the re-

verse direction.

7. Release the reverse sewing lever and step down on the foot con-

troller to start sewing in the forward direction.

Puntadas rectas

XL5030 XL5020 XL5010

Número de puntada

Largo de puntada

2 2 5 Puntada recta (Aguja en el centro)

1-4

3 3 6 Puntada recta (Aguja a la izquierda)

12 10 13

Puntada triple elástica (Aguja en el centro)

Fija 2,5

13 11 14

Puntada triple elástica (Aguja a la izquierda)

Para empezar a coser

1. Gire el selector de puntadas para seleccionar la puntada desea-

da. Ponga dicho selector de puntadas en puntada recta o punta-

da triple elástica para el tipo de puntada deseado.

2. Levante la aguja a su posición más alta y levante la palanca del

prensatelas.

3. Saque el hilo inferior girando la ruedecilla hacia usted (en el sen-

tido contrario a las manecillas de un reloj) y tire los hilos superior

e inferior hacia la parte trasera del prensatelas.

4. Coloque el tejido debajo del prensatelas con la aguja de 1 cm

(3/8") de la orilla del tejido.

5. Baje el prensatelas.

Retroceso

La puntada de retroceso se utiliza para finalizar una costura o refor-

zarla.

6. Baje la palanca de retroceso hasta el final y presione suavemen-

te el pedal. Cosa de 5 a 10 puntadas en la dirección de retroceso.

7. Suelte la palanca de retroceso y pise el pedal para volver a coser

hacia adelante.

Punto diritto

XL5030 XL5020 XL5010

Punto Lunghezza

2 2 5 Punto diritto (ago al centro)

1-4

3 3 6 Punto diritto (ago a sinistra)

12 10 13 Punto stretch triplo (ago al centro)

Fissa 2,5

13 11 14 Punto stretch triplo (ago a sinistra)

Inizio della cucitura

1. Ruotare il selettore dei punti per selezionare il punto desiderato. Spo-

stare il selettore dei punti sul punto diritto o punto stretch triplo in base

al tipo di punto richiesto.

2. Far salire l’ago fino alla posizione più alta e sollevare la leva del piedino

premistoffa.

3. Tirare il filo inferiore girando il volantino verso se stessi (in senso

antiorario) e disporre insieme il filo superiore e quello inferiore dietro il

piedino premistoffa.

4. Stendere il tessuto sotto il piedino premistoffa con l’ago a circa 1 cm dal

bordo.

5. Abbassare il piedino premistoffa.

Cucitura di ritorno

La cucitura a marcia indietro serve a fissare o rinforzare la fine del punto.

6. Spingere più a fondo possibile la leva di cucitura di ritorno e premere

leggermente sul reostato. Cucire circa 5-10 punti a marcia indietro.

7. Rilasciare la leva di cucitura e premere sul reostato per iniziare a cucire

a marcia avanti.

I'm a complete notice, and need your help.
I was using my sewing machine and the unit that holds the needle came off the main rod that moves up and down.. There seems to be a tiny alan screw, is that what holds it on the rod? Would need a tiny alan key..

Thank you for any help..
Kind regards
Helen Submitted on 10-10-2020 at 20:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5030 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5030

Brother XL-5030 User Manual - German, Dutch, French - 85 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5030 Manual

Product: