Manual Brother XL-5030 (page 39 of 82) (English, Italian, Spanish)

631388

Zoom out

Zoom in

1/82

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Twin-Needle Sewing

Your sewing machine is designed for twin-needle sewing, which al-

lows you to sew using two upper threads. You can use the same color

or two different colors of thread for decorative stitches.

Inserting The Twin Needle

Insert the twin needle in the same way that a single needle is inserted.

(Refer to page 7.) The flat side of the needle should be toward the back

and the rounded side should be toward you.

Setting The Extra Spool Pin

Place the extra vertical spool pin in the hole found on the top right-

hand side of the machine. Place the second spool of thread on this pin

as shown in fig. A.

1 Extra spool pin

Twin-Needle Threading

Each needle should be threaded separately.

1. Threading the Right Needle

Follow the same instructions for single-needle threading. See page

25 for more details.

2. Threading the Left Needle

Thread the left needle in the same way as the right needle was

threaded, but do not pass the thread through the thread guide above

the needle before passing it through the eye of the left needle as

shown in fig. B.

2 Right needle thread passes through the guide.

3 Left needle thread passes in front of the guide.

WARNING:

By using a twin needle, use only four patterns: the straight stitch (center

needle position), the triple stretch stitch (center needle position), the

most narrow zigzag stitch and most narrow triple zigzag stretch stitch.

Otherwise the needles may hit the needle plate causing the needle to

break.

Costura con aguja doble

Su máquina de coser ha sido concebida para poder utilizar una aguja

doble y permitir la costura con dos hilos superiores. Puede usar el mismo

color de hilo o dos hilos de colores distintos para puntadas decorativas.

Para introducir la aguja doble

Introdúzcala de la misma manera que una aguja simple (ver página

7). La parte plana de la aguja debe apuntar hacia la parte trasera

mientras que la parte inclinada debe apuntar hacia usted.

Para instalar el porta carretes extra

Coloque el porta carretes vertical extra en el orificio previsto arriba

de la máquina, en la parte derecha. Coloque el segundo carrete de

hilo en el eje tal como indica la fig. A.

1 Porta carretes extra

Enhebrado de la aguja doble

Cada una de las agujas debe ser enhebrada por separado.

1. Enhebrado de la aguja derecha.

Siga las mismas instrucciones que para el enhebrado de una

sola aguja. Consulte la página 26 para obtener más información.

2. Enhebrado de la aguja izquierda.

Enhebre la aguja izquierda de la misma manera que la aguja

derecha. Sin embargo, no hay que pasar el hilo por la guía que

se sitúa arriba de la aguja. Conviene pasarlo directamente por el

ojo de la aguja izquierda, tal como se muestra en la fig. B.

2 El hilo de la aguja derecha pasa por la guía

3 El hilo de la aguja izquierda pasa por delante de la guía.

ADVERTENCIA:

Cuando utilice una aguja doble, use únicamente cuatro punta-

das: la puntada recta (posición central de la aguja), la puntada

triple elástica (posición central de la aguja), la puntada zigzag

más estrecha y la puntada triple zigzag elástica más estrecha.

De lo contrario, las agujas pueden chocar con la placa de agu-

jas y romperse.

Cucitura con ago gemello

Su questa macchina da cucire è possibile montare un ago gemello, il che

consente di cucire contemporaneamente con due fili d’ago per eseguire punti

decorativi ad uno o due colori.

Inserimento dell’ago gemello

Per inserire l’ago gemello, procedere come per l’inserimento dell’ago sin-

golo. (Vedere a pagina 7.) L’ago va posizionato con la parte piatta rivolta

indietro e la parte arrotondata rivolta verso se stessi.

Applicazione del porta-rocchetto ausiliario

Inserire il porta-rocchetto ausiliario nell’apposito foro situato in alto a de-

stra sulla macchina e collocarvi il secondo rocchetto di filo come mostrato

in fig. A.

1 Porta-rocchetto ausiliario

Infilatura dell’ago gemello

Infilare ogni ago separatamente.

1. Infilatura dell’ago destro

Seguire le stesse istruzioni relative all’infilatura dell’ago singolo. Vede-

re a pagina 26 per istruzioni più dettagliate.

2. Infilatura dell’ago sinistro

Infilare l’ago sinistro nello stesso modo dell’ago destro, ma senza far

passare il filo attraverso il guidafilo sopra l’ago prima di averlo infilato

nella cruna dell’ago sinistro come mostrato in fig. B.

2 Il filo dell’ago destro passa attraverso questa guida.

3 Il filo dell’ago sinistro passa davanti a questa guida.

AVVERTENZA:

Utilizzare l'ago gemello soltanto per: punto diritto (ago al centro), pun-

to stretch triplo (ago al centro), lo zig-zag più stretto e lo punto zigzag

stretch triplo più stretto. In caso contrario, gli aghi possono colpire la

placca dell’ago e rompersi.

I'm a complete notice, and need your help.
I was using my sewing machine and the unit that holds the needle came off the main rod that moves up and down.. There seems to be a tiny alan screw, is that what holds it on the rod? Would need a tiny alan key..

Thank you for any help..
Kind regards
Helen Submitted on 10-10-2020 at 20:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5030 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5030

Brother XL-5030 User Manual - German, Dutch, French - 85 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5030 Manual

Product: