631388

Brother XL-5030 Manual

38
Zoom out
Zoom in
Previous page
1/82
Next page
30
CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
Drawing Up Lower Thread
1. Raise the presser foot and the needle to their highest positions.
2. With your left hand, hold the end of the upper thread. With your
right hand, turn the balance wheel toward you (counterclockwise)
until the needle moves down and back up again to its highest posi-
tion.
3. The upper thread should have caught the lower thread in a loop.
Pull the upper thread toward you and the lower thread will come
up from the bobbin in a large loop.
4. Pull out about 15 cm (6") of both threads and place them toward
the back of the machine straight behind the presser foot. The upper
thread should pass between the toes of the presser foot.
1 Upper thread
2 Lower thread loop
3 Lower thread
1
2
3
1
Para sacar el hilo de la canilla
1. Levante el prensatelas y la aguja a sus posiciones más elevadas.
2. Con la mano izquierda, sujete el extremo del hilo superior. Con la
mano derecha, gire la ruedecilla hacia usted (en el sentido con-
trario al de las manecillas de un reloj) hasta que la aguja vaya
hacia abajo y suba a su posición más alta.
3. El hilo superior debe haber enganchado el hilo inferior en un lan-
zo. Tire del hilo superior hacia usted y el hilo inferior saldrá de la
canilla en un amplio enlace.
4. Tire unos 15 cm (6") de ambos hilos y colóquelos hacia la parte
posterior de la máquina, justo detrás del prensatelas. El hilo su-
perior debe pasar entre los salientes del prensatelas.
1 Hilo superior
2 Enlace del hilo inferior
3 Hilo inferior
Raccolta del filo inferiore
1. Sollevare il piedino premistoffa e l’ago fino alla posizione più alta.
2. Reggere l’estremità del filo superiore con la mano sinistra. Con la mano
destra girare il volantino verso se stessi (in senso antiorario) finché l’ago
non scende e risale fino alla posizione più alta.
3. In questo modo il filo superiore afferrerà il filo inferiore formando un
cappio. Tirare il filo superiore verso se stessi in modo che il filo inferio-
re fuoriesca dalla spoletta in un ampio cappio.
4. Tirare circa 15 cm dei due fili e orientarli verso il retro della macchina
direttamente dietro il piedino premistoffa. Il filo superiore deve passare
attraverso le punte del piedino premistoffa.
1 Filo superiore
2 Cappio del filo inferiore
3 Filo inferiore
… 38 …


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-xl-5030

Reset search

  • I'm a complete notice, and need your help.
    I was using my sewing machine and the unit that holds the needle came off the main rod that moves up and down.. There seems to be a tiny alan screw, is that what holds it on the rod? Would need a tiny alan key..

    Thank you for any help..
    Kind regards
    Helen Submitted on 10-10-2020 at 20:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5030 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-5030

Brother XL-5030 User Manual - German, Dutch, French - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info