Manual Brother XL-5012 (page 30 of 83) (English, Italian, Spanish)

631390

Zoom out

Zoom in

1/83

CONTENTS

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

MAINTENANCE

INDEX

Reverse Sewing Lever

To sew in reverse, press down the reverse sewing lever as far as possi-

ble and hold it in that position while lightly stepping on the foot con-

troller. To sew forward, release the reverse sewing lever. Reverse sew-

ing is used for locking and reinforcing seams. (See fig. A.)

Drop Feed Lever (when the machine is

equipped with a drop feed lever)

Use the drop feed lever to raise or lower the feed dogs according to the

job that is being done. When monogramming, embroidering, darning

or sewing on buttons, the feed dogs should be lowered so that the

garment will not be fed. (See fig. B.)

1 Drop feed lever

2 Up position: feed dog is down

3 Down position: feed dog is up

Palanca de retroceso

Para coser hacia atrás, baje completamente la palanca de retroceso

y manténgala en esa posición mientras presiona ligeramente el pe-

dal. Para volver a coser hacia adelante, vuelva a subir la palanca de

retroceso. La costura hacia atrás se usa para terminar y reforzar

costuras. (Ver fig. A.)

Palanca de alimentación de bajada

(cuando la máquina está equipada con

una palanca de alimentación de bajada)

Use la palanca de bajada para subir o bajar los dientes dependiendo

del trabajo efectuado. Para hacer monogramas, bordados, zurcidos

o para coser botones, es necesario bajar los alimentadores para

que no alimenten el tejido. (Ver fig. B.)

1 Palanca de alimentación de bajada

2 En posición arriba: los dientes hacia abajo

3 En posición baja: los dientes hacia arriba

Leva di cucitura di ritorno

Per cucire a marcia indietro, spingere più a fondo possibile la leva di cucitu-

ra di ritorno e mantenerla in quella posizione premendo al tempo stesso

leggermente sul reostato. Per cucire a marcia avanti, rilasciare la leva di

cucitura di ritorno. La cucitura di ritorno serve a fissare e rinforzare le cuci-

ture. (Vedi fig. A.)

Leva abbassa-trasportatore

(se la macchina è equipaggiata con la leva

abbassa-trasportatore)

Utilizzare la leva abbassa-trasportatore per sollevare o abbassare la griffa di

trasporto in base al lavoro da eseguire. Quando si devono eseguire mono-

grammi, lavori di ricamo, di rammendo o cuciture su bottoni, la griffa di

trasporto va abbassata in modo che l’indumento non venga alimentato dal

trasportatore. (Vedi fig. B.)

1 Leva abbassa-trasportatore

2 Posizione superiore: griffa di trasporto abbassata

3 Posizione inferiore: griffa di trasporto alzata

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5012 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother XL-5012 Manual

Product: