631390
28
Zoom out
Zoom in
Previous page
1/83
Next page
20
CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
Stitch Length Dial
Depending on your selected stitch, you may need to adjust the stitch
length for best results.
The numbers marked on the stitch length dial represent the length of
the stitch in millimeters (mm) (1/25").
THE HIGHER THE NUMBER, THE LONGER THE STITCH.
The “0” setting does not feed the material. This is used for sewing on
a button.
The “ ” area is used for making a Satin Stitch (a close zigzag stitch)
which can be used in making buttonholes and decorative stitches. The
position needed for making the Satin Stitch varies according to the
material and thread being used. To determine the exact dial position,
you should first test the stitch and length settings on a scrap of fabric to
observe the feeding of the material.
1 Stitch length
2 Shorter
3 Longer
1
23
0
3
4
2
1
+
SS
Selector de largo de puntada
Según la puntada seleccionada, puede ser necesario ajustar su lar-
go para lograr mejores resultados.
Los números indicados en el selector representan el largo de las
puntadas en milímetros (1/25").
CUANTO MAYOR EL NÚMERO, MÁS LARGA LA PUNTADA.
El ajuste “0” no alimenta el tejido. Sirve para coser un botón.
La zona ” se usa para realizar puntadas de realce (una puntada
zigzag muy cerrada) que pueden servir para ojales o decoración. La
posición necesaria para realizar puntadas de realce varía depen-
diendo del tejido o hilo utilizados. Para determinar la posición exacta
del selector, conviene primero probar la puntada y los ajustes de
largo en un pedazo de tejido para ver cómo se alimenta el material.
1 Largo de puntada
2 Más corto
3 Más largo
Selettore della lunghezza del punto
A seconda del tipo di punto selezionato, potrebbe essere necessario regolar-
ne la lunghezza per ottenere un risultato ottimale.
I numeri sul selettore indicano la lunghezza del punto in millimetri (mm).
PIÙ ALTO È IL NUMERO, PIÙ LUNGO SARÀ IL PUNTO.
Con la regolazione “0” il tessuto non viene alimentato dal trasportatore.
Questa regolazione è adatta per cuciture di bottoni.
L’area marcata “ ” sul selettore va utilizzata per eseguire un punto satin
(una successione di punti zigzag molto fitti) che può essere utilizzato per
eseguire asole e punti decorativi. La regolazione più idonea per il punto
satin varia in base al tipo di tessuto e di filo utilizzati. Per stabilire la posi-
zione esatta del selettore, è bene provare prima il punto e la lunghezza scel-
ta su un campione di stoffa per verificare il trasporto del tessuto.
1 Lunghezza del punto
2 Più corta
3 Più lunga
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-5012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-5012 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info