458336
14
Zoom out
Zoom in
Previous page
1/63
Next page
13
1
Changing the Presser Foot
You will have to change the presser foot depending
on what you want to sew and how.
Snap-On Type
1
Raise the needle to its highest position by
turning the balance wheel toward you
(counterclockwise) and raise the presser foot
lever.
2
Release the foot by raising the lever at the
back of the holder.
1 Presser Foot
2 Shank
3
Put a different presser foot on the needle plate
so that the bar on the presser foot is in line
with the slot on the shank.
4
Lower the presser foot lever and fix the
presser foot onto the shank. If the presser foot
is in the correct place, the bar should snap in.
Presser foot installation orientation
Always turn off the power before you
change the presser foot. If you leave the
power on and step on the controller, the
machine will start and you may be
injured.
Always use the correct presser foot for
the stitch pattern you have chosen. If you
use the wrong presser foot, the needle
may strike the presser foot and bend or
break, and may cause injury.
Only use presser feet that have been
designed to be used with this machine.
Using other any presser feet may cause
an accident or injury.
CAUTION
1
2
If the presser foot is not installed with the
correct orientation, the needle may strike
the presser foot, which may bend or
break the needle and cause injury.
CAUTION
14


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-xl-2230

Reset search

  • Balance wheel barley able to turn so machine won’t sew Submitted on 29-11-2022 at 04:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-2230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-2230 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-2230

Brother XL-2230 User Manual - German - 63 pages

Brother XL-2230 User Manual - Dutch - 63 pages

Brother XL-2230 User Manual - French - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info