458336
13
Zoom out
Zoom in
Previous page
1/63
Next page
KNOWING YOUR SEWING MACHINE ————————————————————————————————————————
12
Replacing the Needle
1
Remove the power supply plug from the
outlet.
2
Raise the needle bar to its highest position by
turning the balance wheel counterclockwise.
3
Lower the presser foot lever.
1 Presser foot lever
4
Hold the needle with your left hand, and then
use a screwdriver to turn the needle clamp
screw counterclockwise to remove the
needle.
1 Screwdriver
2 Needle clamp screw
Do not use a lot of force when loosening or
tightening the needle clamp screw,
otherwise certain parts of the sewing
machine may be damaged.
5
With the flat side of the needle toward the
back of the machine, put the needle in until it
touches the needle stopper.
1 Needle stopper
2 Needle
6
While holding the needle with your left hand,
use the screwdriver to tighten the needle
clamp by turning it clockwise.
Put the twin needle in the same way.
Turn the main power switch off before
you change the needle. If you leave the
main power on and step on the foot
controller, the machine will start and you
may be injured.
Only use sewing-machine needles for
home use. Other needles may bend or
break and cause injury.
Never sew with a bent needle. A bent
needle will easily break and cause injury.
CAUTION
2
1
Make sure you push in the needle until it
touches the stopper, and securely tighten
the needle clamp screw with a
screwdriver. If the needle is not in fully,
or if the needle clamp screw is loose, the
needle may break or the machine may be
damaged.
1
2
CAUTION
13


Need help? Post your question in this forum.

Forumrules
1

Forum

brother-xl-2230

Reset search

  • Balance wheel barley able to turn so machine won’t sew Submitted on 29-11-2022 at 04:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother XL-2230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother XL-2230 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother XL-2230

Brother XL-2230 User Manual - German - 63 pages

Brother XL-2230 User Manual - Dutch - 63 pages

Brother XL-2230 User Manual - French - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info