618175
56
Zoom out
Zoom in
Previous page
1/192
Next page
54
Now, the machine is ready to begin embroidering.
When the machine starts embroidering, the presser foot is automatically lowered, and then at the end of
stitching, the necessary thread trimming operations are performed.
Locking mechanism
For safety reasons, this embroidery machine is equipped with a locking function.
Normally, the embroidery machine is locked. Unless the machine is unlocked, it cannot start embroidering. If
the embroidery machine is not started within 10 seconds after unlocking it, it automatically returns to being
locked.
The “Start/Stop” button color shows whether or not the embroidery machine is locked. If the “Start/Stop” button
lights up in red, the machine is locked. If the “Start/Stop” button flashes in green, the machine is unlocked.
Starting embroidering
a
Touch to unlock the
embroidery machine.
1 The thread color being used for embroidering or
will soon be used for embroidering appears at the
top of the thread color sequence display. The
remaining thread colors are listed in the
embroidering order, starting from the top.
The “Start/Stop” button begins flashing in green and
the embroidery machine can be started.
If the “Start/Stop” button is not pressed within 10
seconds after unlocking the embroidery machine, the
machine becomes locked again.
b
Press the “Start/Stop” button.
Press the “Start/Stop” button while it is flashing in
green. If the “Start/Stop” button returns to being lit in
red, perform this procedure again from step a.
The “Start/Stop” button lights up in green and begins
embroidering the first color.
While the machine is embroidering, the point being
embroidered is indicated by the green crosshairs in
the pattern display area. In addition, the number of
stitches and the time count up.
c
After embroidering of the first color is
finished, the machine automatically stops
and trims the thread.
No thread trimming operations at the beginning of
stitching and at the end of stitching are necessary.
11. Starting Embroidering
CAUTION
For safety reasons, the embroidery machine must not be left unattended while it is embroidering.
While the machine is in operation, pay special attention to the needle location. In addition, keep your
hands away from all moving parts such as the needle, thread take-up lever and carriage, otherwise injuries
may result.
Note
Make sure that there are no objects within
the moving area of the embroidery frame. If
the embroidery frame hits another object,
the pattern may become misaligned.
1
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother VR in the language / languages: English as an attachment in your email.

The manual is 14,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother VR

Brother VR User Manual - German - 192 pages

Brother VR User Manual - Dutch - 192 pages

Brother VR User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info