618175
54
Zoom out
Zoom in
Previous page
1/192
Next page
52
b
Pull out about 150 mm of thread. Then, as
shown in the illustration, pass the thread
under the fork of the automatic threading
mechanism from the right, and then catch
the thread with the hook that passes
through the eye of the needle.
1 Hook
2 Fork
c
Pass the thread under the guide on the
presser foot.
1 Guide on presser foot
2 Notch in guide on presser foot
Make sure that the thread securely passes through the
notch in the guide on the presser foot.
d
Securely pass the thread through the groove
in the thread cutter, and then lightly pull
the thread to cut it.
1 Groove in thread cutter
e
Press the “Automatic Threading” button.
The threader moves back away from the needle. The
thread is pulled through the needle eye.
The wiper comes out and catches the thread between
the needle and the threader.
The threader goes back to the original home position.
This completes the upper threading.
Note
When catching the thread with the hook, be
careful that the thread does not become
loose.
Note
If the thread is not correctly passed through
the groove in the thread cutter, the
message “Wiper error” appears and the
needle cannot be threaded. Be sure to
securely pass the thread through the
groove.
If enough thread is not pulled out, the
thread cannot be pulled through the thread
cutter.
Note
If the thread is not taut, it may come out of
the thread tension disc. After upper
threading is finished, check again to make
sure that the thread is correctly passed into
the thread tension disc. (Refer to step
e on
page 50.)
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother VR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother VR in the language / languages: English as an attachment in your email.

The manual is 14,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother VR

Brother VR User Manual - German - 192 pages

Brother VR User Manual - Dutch - 192 pages

Brother VR User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info