718657
68
Zoom out
Zoom in
Previous page
1/73
Next page
64
Problem Possible Cause Solution
The printing position of
small labels is incorrect.
The media sensor
sensitivity is not set
correctly.
Calibrate the sensor sensitivity again.
The label size is incorrect. Set the correct label size and gap size.
The vertical offset setting in
the driver is incorrect.
If using the BarTender software, set the
Vertical Offset in the driver.
Incomplete printing on the
left or right side of label.
The label size is set up
incorrectly.
Set the correct label size.
Warped labels.
The ribbon is installed
incorrectly.
Reinstall the ribbon.
To install the ribbon roll, see section
3.1 Load the Ribbon
.
The media is installed
incorrectly.
Reinstall the label roll.
To install the label roll, see section
3.2 Load the Media
.
The print density setting is
incorrect.
Adjust the print density to improve the
print quality.
The media is not fed
correctly.
Make sure the label guide touches the
edge of the Media Guide Tips.
Blank labels with gray lines.
The Print Head is dirty. Clean the Print Head.
The Platen Roller is dirty. Clean the Platen Roller.
Irregular printing.
The printer is in Hex Dump
mode.
Turn the printer on and off to skip the
dump mode. (See section
5.1.2
Gap/Black Mark Sensor Calibration,
Self-Test, and Entering Dump Mode.)
For more information about cleaning the printer, see section 11. Maintenance
.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother TD-4650TNWB-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother TD-4650TNWB-R in the language / languages: English as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother TD-4650TNWB-R

Brother TD-4650TNWB-R User Manual - German - 79 pages

Brother TD-4650TNWB-R User Manual - Dutch - 78 pages

Brother TD-4650TNWB-R User Manual - French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info