718657
67
Zoom out
Zoom in
Previous page
1/73
Next page
63
Problem Possible Cause Solution
I cannot print. The serial or USB cable is
not connected correctly.
Reconnect the serial or USB cable.
The serial or USB cable
may be damaged.
Try a new cable.
The ribbon or media may be
incorrect or damaged.
Use a correct ribbon or media.
Check the ribbon for damage.
Reinstall the ribbon.
The Print Head may need
cleaning.
Clean the Print Head.
The print density and speed
may be set incorrectly.
Adjust the print density and print speed.
The Print Head's harness
connector may not be
connected correctly with the
Print Head.
Turn off the printer and plug the Print
Head's harness connector to the Print
Head again.
Your custom program may
not contain the necessary
commands.
Make sure that your program contains
the PRINT command at the end of the
file and a CRLF at the end of each
command line.
Memory full
(FLASH/DRAM).
The printer's FLASH/DRAM
memory is full.
Delete unused files from the
FLASH/DRAM memory.
Poor Print Quality.
The ribbon/media is loaded
incorrectly.
Reload the media/ribbon.
Dust or adhesive has
accumulated on the Print
Head.
Clean the Print Head.
Clean the Platen Roller.
The print density is set
incorrectly.
Adjust the print density and print speed.
The Print Head is damaged. Run the printer self-test and check the
Print Head test pattern for missing dots.
The ribbon/media is
incompatible.
Install the correct ribbon/media.
Labels are skipped when
printing.
The label size is not
specified correctly.
Check if the label size is set up
correctly.
The sensor sensitivity is not
set correctly.
Calibrate the sensor using the Auto Gap
or Manual Gap options.
The media sensor is dirty. Clean the Gap/Black Mark Sensor using
a blower brush.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother TD-4650TNWB-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother TD-4650TNWB-R in the language / languages: English as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother TD-4650TNWB-R

Brother TD-4650TNWB-R User Manual - German - 79 pages

Brother TD-4650TNWB-R User Manual - Dutch - 78 pages

Brother TD-4650TNWB-R User Manual - French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info