Manual Brother Super Galaxie3000D (page 301 of 319) (English)

555756

301

Zoom out

Zoom in

1/319

9-6 Troubleshooting

1 —

2 —

3 —

4 —

5 —

6 —

7 —

8 —

9 —

CONTENTS

Index

1 There is a mistake in the upper or bob-

bin threading.

2 Spool cap is set incorrectly.

3 Using improper needle or thread for the

selected fabric.

4 Needle is turned, bent or the point is dull.

5 Stitches are too long when sewing thin

fabrics.

6 Thread tension is set incorrectly.

7 Wrong presser foot.

1 Dust or lint is caught in the feed dogs.

2 Pieces of thread are caught in the race.

3 Upper threading is incorrect.

4 There are scratches on the race.

1 Needle is not in the correct position.

2 Threading hook does not pass through

the eye of the needle.

3 Needle is installed incorrectly.

1 Upper threading is incorrect.

2 Bobbin is set incorrectly.

3 Using improper needle or thread for the

selected fabric.

4 Presser foot holder is not attached cor-

rectly.

5 Thread tension is set incorrectly.

1 Wrong presser foot was used.

2 Pattern adjustment settings were set

incorrectly.

3 Did not use a stabilizer material on thin

fabrics or stretch fabrics.

4 Thread tension is set incorrectly.

Fabric

puckers

Check the steps for threading the

machine and rethread it correctly.

Check the method for attaching the

spool cap, then reattach the spool

cap.

Check the “Fabric/Thread/Needle

Combination” chart.

Replace the needle.

Shorten the stitch length.

Adjust the thread tension.

Use correct presser foot.

Remove the dust or lint.

Clean the race.

Check the steps for threading the

machine and rethread the ma-

chine.

Replace the race, or consult your

authorized dealer.

Press the “Needle Position” button

to raise the needle.

Press the “Needle Position” button

to raise the needle.

Reinstall the needle correctly.

Check the steps for threading the

machine and rethread the ma-

chine.

Reset the bobbin.

Check the “Fabric/Thread/Needle

Combination” chart.

Reattach the presser foot holder

correctly.

Adjust the thread tension.

Attach the correct presser foot.

Revise the pattern adjustment set-

tings.

Attach a stabilizer material.

Adjust the thread tension.

High-

pitched

sound

while

sewing

Can not

thread the

needle

Thread

tension is

incorrect

Character

pattern

does not

turn out

Problem Cause

PageSolution

1-32

1-33

1-45

1-43

2-9

2-13, 5-40

3-1

8-2

1-32

8-2

1-3

1-43

1-32

1-31

1-45

1-42

2-13, 5-40

3-1

4-11

4-8

2-13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Super Galaxie3000D in the language / languages: English as an attachment in your email.

The manual is 7,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Super Galaxie3000D Manual

Product: