718644
57
Zoom out
Zoom in
Previous page
1/65
Next page
Troubleshooting
51
10
The print quality is poor. Is there dirt or lint on the roller preventing it from rolling freely?
For more information, see Self-Cleaning Print Head on page 47.
After replacing the Roll while the
Add-In feature was activated, the
layout style was not updated.
Close P-touch Editor to exit the Add-In, and then reactivate the Add-In.
The P-touch Add-In icon is not
displayed in Microsoft Word.
Is Microsoft Word started up from Microsoft Outlook?
Is Microsoft Word chosen as the default editor for Microsoft Outlook?
Due to program limitations, the Microsoft Word Add-In does not work with
the above settings. Quit Microsoft Outlook, and restart Microsoft Word.
The printer is in cooling mode The thermal head is too hot.
The printer stops and resumes printing only after the thermal head has cooled
down. The head may become too hot if you are printing a large number of
labels.
When the thermal head becomes too hot, it may produce imaging outside the
print area. To avoid or delay overheating, make sure the printer has adequate
ventilation and is not located in an enclosed space.
If the printer must cool down because it overheated due to the type of DK Roll
you are using or the contents of the label, printing may take longer than usual.
Note
This condition may occur more often when the printer is used at high altitude
(more than 3,048 m) due to a lower air density available to cool the printer.
Cutter error If a cutter error occurs, keep the DK Roll Compartment Cover closed and press
the Power ( ) Button. The cutter moves back to the normal position and the
printer turns off automatically.
After the printer is Off, check the label outlet and remove any jammed labels.
Contact Brother customer service.
Unable to reset an error To reset an error:
1 Open the DK Roll Compartment Cover, and then close it.
2 If the error is not reset, press the Cutter ( ) Button or
Feed ( ) Button.
3 If the error is not reset, turn the printer off, and then turn it on again.
4 If the error is not reset, contact Brother customer service.
I want to reset the printer. You can reset the printer using the Printer Setting Tool from a computer.
For more information, see Change the Label Printer Settings on page 12.
You can reset the printer using the Printer buttons.
For more information, see Reset Device Settings to the Factory Settings Using
the Label Printer Buttons on page 46.
Problem Solution
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother QL-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother QL-600 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother QL-600

Brother QL-600 User Manual - German - 69 pages

Brother QL-600 User Manual - Dutch - 67 pages

Brother QL-600 User Manual - French - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info