631322
27
Zoom out
Zoom in
Previous page
1/90
Next page
18
KNOWING YOUR SEWING MACHINE
CONOZCA SU MÁQUINA DE COSER
CONNAITRE SA MACHINE A COUDRE
Feed Dog Position Switch
Use the Feed Dog Position Switch to raise or lower the feed dogs
according to the job that is being done. When monogramming,
embroidering, darning or sewing on buttons, the feed dogs should
be lowered. (The garment will not be fed.)
NOTE:
When raising or lowering the feed dogs, move the Feed Dog
Position Switch as far as possible to the appropriate side. Since the
feed dogs can not be raised using the Feed Dog Position Switch
immediately after they are lowered, move the switch to the Up
Position, turn the handwheel toward you once and the feed dogs will
move into the raised position.
1 Feed dog position switch
2 Down position
3 Up position
Converting to Free-arm Style
Free-arm sewing is convenient for sewing tubular and hard-to-
reach areas on a garment. To change your machine to the free-arm
style, simply slide out the flat bed attachment to the left.
1 Slide the flat bed attachment to the left.
1 Flat bed attachment
Palanca de los alimentadores
Utilice la palanca de los alimentadores para levantar o bajar los
dientes de los alimentadores de conformidad con el trabajo a
realizar. Para monogramas, bordados, zurcidos o para la costura de
botones, los alimentadores deben ser bajados (para que el tejido no
se alimente).
NOTA:
Al subir o bajar los alimentadores, conviene desplazar la palanca de
los alimentadores lo más posible hacia la posición deseada. Dado
que los alimentadores no pueden ser bajados con la palanca inme-
diatamente después de su subida, suba la palanca, gire la ruedecilla
hacia usted y los alimentadores se encontrarán subidos.
1 Palanca de los alimentadores
2 Posición baja
3 Posición alta
Conversión en modalidad
de brazo libre
La costura con brazo libre es práctica para coser zonas tubulares y
difíciles de acceso en los tejidos. Para transformar su máquina a la
modalidad de brazo libre, deslice simplemente la plataforma hacia
la izquierda.
1 Deslice el plataforma hacia la izquierda.
1 Plataforma
Levier des griffes d’entraînement
Utiliser le levier des griffes d’entraînement pour relever ou abaisser les
griffes en fonction du travail à effectuer. Lors de la création de monogram-
mes, de broderies, lors de reprisages ou de la couture de boutons, les griffes
d’entraînement doivent être abaissées (l’ouvrage ne sera pas entraîné).
REMARQUE:
Pour relever ou abaisser les griffes d’entraînement, déplacer le levier aussi
loin que possible dans le sens souhaité. Etant donné que les griffes
d’entraînement ne peuvent pas être relevées à l’aide du curseur de réglage
approprié lorsqu’elles viennent d’être abaissées, il convient de mettre ce
dernier sur la position haute, de tourner une fois le volant vers soi et les
griffes d’entraînement se remettront dans la position relevée.
1 Levier des griffes d’entraînement
2 Marque de la position élevée
3 Pour les abaisser
Conversion en modèle bras libre
La couture à bras libre s’impose pour des coutures tubulaires ou pour des
endroits difficiles à atteindre sur des vêtements. Pour mettre votre ma-
chine en mode bras libre, il suffit de faire glisser le plateau vers la gauche
pour l’enlever.
1 Glisser la plateau vers la gauche.
1 Plateau
32
1
1
1
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PS-3700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PS-3700 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info