631322

Brother PS-3700 Manual

26
Zoom out
Zoom in
Previous page
1/90
Next page
17
KNOWING YOUR SEWING MACHINE
CONOZCA SU MÁQUINA DE COSER
CONNAITRE SA MACHINE A COUDRE
7
6
5
2
2
1
0
3
1
Stitch Width Dial
Depending on the stitch selected, you may need to adjust the stitch
width.
The numbers marked on the dial represent the stitch width.
THE HIGHER THE NUMBER, THE WIDER THE STITCH.
1 Stitch width dial
CAUTION
Do not adjust the stitch width while the needle is in the fabric.
Otherwise, the needle or fabric may be damaged.
NOTE:
When you choose the Straight Stitch or the Triple Stretch Stitch you
can change the needle position from left to right.
2 Turn the stitch width dial toward the “7” setting for
left needle position.
3 Turn the stitch width dial toward the “0” setting for
right needle position.
Reverse Sewing Lever
Reverse sewing is used for back tacking and reinforcing seams.
To sew in reverse, push the Reverse Sewing Lever down as far as
possible and hold in that position while pressing lightly on the foot
pedal. To sew forward, release the Reverse Sewing Lever. The
machine will then sew forward.
1 Reverse sewing lever
Selector de ancho de puntada
Según el modelo de puntada seleccionado, se necesitará o no ajustar
el ancho de puntada.
Los números indicados en el selector representan el ancho de las
puntadas.
A MAYOR NUMERO SELECCIONADO, MAYOR ANCHO DE PUN-
TADA.
1 Selector de ancho de puntada
PRECAUCIÓN
No ajuste el ancho de puntada mientras la aguja esté metida en el
tejido. De lo contrario, la aguja o el tejido podrían dañarse.
NOTA:
Cuando elige la puntada recta o la triple puntada elástica, es posible
cambiar la posición de la aguja de izquierda a derecha.
2 Para la aguja izquierda, ajuste el selector de ancho
de puntadas en “7”.
3 Para la aguja derecha, ajuste el selector de ancho
de puntadas en “0”.
Pulsador de retroceso
La costura hacia atrás se usa para remates y para reforzar las costuras.
Para coser hacia atrás, apriete a fondo la palanca de retroceso y
manténgala en esa posición mientras presiona ligeramente el pedal.
Para volver a coser hacia adelante, suelte el pulsador. La máquina
coserá hacia delante.
1 Pulsador de retroceso
Sélecteur de largeur de point
En fonction du point sélectionné, il peut s’avérer nécessaire d’en régler la
largeur.
Les chiffres inscrits sur le sélecteur représentent la largeur réelle du point.
PLUS LE CHIFFRE SERA ELEVE, PLUS LE POINT SERA LARGE.
1 Sélecteur de largeur de point
ATTENTION
Ne pas régler la largeur de point pendant que l’aiguille est dans le
tissu. Sinon, l’aiguille ou le tisseur risque d’être abîmé.
REMARQUE:
Lorsque le point droit ou le triple point élastique sont sélectionnés, la
position de l'aiguille peut être changée de la gauche au à droite.
2 Régler le sélecteur de largeur de point sur “7” pour
l’aiguille à gauche.
3 Régler le sélecteur de largeur de point sur “0” pour
l’aiguille à droite.
Levier de couture en marche arrière
Utiliser la couture en marche arrière pour arrêter ou renforcer une couture.
Pour coudre en arrière, pousser le levier de couture en marche arrière au
maximum vers le bas, et le maintenir dans cette position tout en appuyant
légèrement sur la pédale. Pour coudre à nouveau vers l’avant, relâcher le
levier. La machine coudra alors en marche avant.
1 Levier de couture en marche arrière
1
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PS-3700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PS-3700 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info