606045
43
Zoom out
Zoom in
Previous page
1/93
Next page
36
STRAIGHT AND ZIGZAG STITCHING
PUNTADAS RECTAS Y ZIGZAG
Straight Stitching
Pattern Stitch Length Stitch Width
(Straight Stitch) 1-4
6
(Triple Stretch Stitch) Fixed 2.5
Starting Sewing
1. Turn the Pattern Selection Dial to show your
desired stitch in the Pattern Indication Window.
Setting the Pattern Selection Dial to Straight
Stitch or Triple Stretch Stitch is required.
2. Raise the needle to its highest position and lift the
presser foot lever.
3. Pull the upper thread toward the back of the
presser foot.
4. Place the fabric under the presser foot and posi-
tion the needle 1 cm (3/8") from the edge of the
fabric.
5. Lower the presser foot.
6. To backtack, push down the Reverse Sewing
Button as far as possible. Reverse sewing is used
for locking the end of seams and where reinforce-
ment is needed.
7. Release the Reverse Sewing Button and start
sewing in the forward direction by applying pres-
sure to the foot controller.
Puntadas rectas
Modelo de puntada
Largo de puntada
Ancho de puntada
(Puntada recta) 1-4
6
(Triple puntada pespunto)
Fija 2,5
Para empezar a coser
1. Gire el selector de puntada hasta que la puntada
que desea aparezca en el indicador de puntada.
Es necesario situar el selector de puntada en
puntada recta o en triple puntada pespunte.
2. Levante la aguja a su posición más alta y levante
la palanca del prensatelas.
3. Tire el hilo superior hacia la parte de atrás del
prensatelas.
4. Coloque el tejido debajo del prensatelas y
posicione la aguja a 1 cm (3/8") de la orilla del
tejido.
5. Baje el prensatelas.
6. Para retroceder, baje a fondo el pulsador de
retroceso. El retroceso sirve para finalizar una
costura o reforzarla cuando sea necesario.
7. Suelte el pulsador de retroceso y vuelva a coser
hacia adelante, presionando el pedal.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PS-2300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PS-2300 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info