718890
187
Zoom out
Zoom in
Previous page
1/244
Next page
BASIC SETTINGS AND HELP FEATURE
185
6
a
Touch and to select the stitch length.
The desired size is displayed.
A value between 0 and 1 millimeters if the units of
measurements is set to “mm” (or a value between 0
and 0.04 inch if the units of measurements is set to
“inch”) can be specified.
Specifying the remaining length
of thread
This setting specifies whether the length of upper
thread that remains threaded through the needle
after the thread is trimmed (length of thread passed
through the eye of the needle) has a standard tail
or long tail.
When the embroidery machine is purchased,
“Standard Tail” is selected.
The setting for the remaining length of thread can
be specified from page 2 of the settings screen.
a
Touch and to select the setting.
The desired length is displayed.
If the machine misses stitches with a standard length
of thread after it is trimmed, select “Long Tail”.
When using metallic thread, select “Long Tail”.
Selecting the “Eco Mode” or
“Shutoff Support Mode”
You can save the machine power by setting the
eco mode or the shutoff support mode.
If you leave the machine without using for a
specified period of time, the machine enters in one
of these modes.
“Eco Mode”;
Machine will enter a sleep mode. Touch the
screen or “Start/Stop” button to continue
embroidering.
“Shutoff Support Mode”;
Machine will turn off after set period of time. Turn
machine off and then back on to restart
embroidering.
Press the “Start/Stop” button or touch the screen
display to recover from these modes.
These settings can be specified from page 4 of the
settings screen.
a
Use or to select the time until
entering the mode.
Note
If the setting is changed from the previous
setting, the new setting is only applied to
the next embroidery.
Condition Eco Mode
Shutoff Support
Mode
Available time OFF, 10 - 120
(minute)
OFF, 1 - 12 (hour)
“Start/Stop” button
Green flashing Green slow
flashing
Suspended
function
Machine light,
Screen display
All functions
After recovering The machine starts
from the previous
operation.
You need to turn off
the machine.
Note
If you turn off the machine while the
machine is in the “Eco Mode” or the
“Shutoff Support Mode”, wait for about 5
seconds before turning on the machine
again.
187


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-670E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-670E in the language / languages: English as an attachment in your email.

The manual is 11,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-670E

Brother PR-670E User Manual - German - 244 pages

Brother PR-670E User Manual - Dutch - 244 pages

Brother PR-670E User Manual - French - 244 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info