463771
275
Zoom out
Zoom in
Previous page
1/318
Next page
Using the Optional Cap Frame 273
7
2
Attach the cap frame to the cap frame
driver.
Turn the cap frame to the left so the brim of
the cap does not hit the embroidery machine.
Do not insert the cap frame with the brim
pointing to the right, otherwise parts of the
cap frame may hit the embroidery machine.
Be careful that the cap frame does not hit
any nearby parts, such as the presser foot.
After turning the cap frame so that the front of
the cap faces upward, align the ring of the
cap frame with the ring of the cap frame
driver. While sliding the cap frame to the left
and right, align the notch in the cap frame
with the guiding plate on the cap frame
driver, and then snap the frame into place.
1 Guiding plate on cap frame driver
2 Notch on cap frame
3 Holder
X The cap frame is secured with holders.
Make sure that all of the holders on the
driver are firmly secured in the frame
holes. This completes the installation of
the cap frame, and the cap is ready to be
embroidered.
Removing the cap frame
After embroidering is finished, remove the cap
frame, and then remove the cap.
1
Remove the cap frame from the cap frame
driver.
Place both thumbs on the cap frame holders,
grasping the handles on both the right and
left side, gently pulling toward you. As shown
in the illustration.
1 Holder
2 Handle
Before removing the cap frame, turn it to the
left so that the brim of the cap does not hit the
embroidery machine.
Be careful that the cap frame does not hit
any nearby parts, such as the presser foot.
2
After removing the brim holder, unlock the
snap lock of the clamping frame, remove the
clips, and then remove the cap.
1 Brim holder
2 Snap lock
3 Clips
275


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-1000 in the language / languages: English as an attachment in your email.

The manual is 29,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-1000

Brother PR-1000 User Manual - German - 320 pages

Brother PR-1000 User Manual - Dutch - 320 pages

Brother PR-1000 User Manual - French - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info