463771
274
Zoom out
Zoom in
Previous page
1/318
Next page
APPENDIX
272
j
Use the clips to secure the cap.
1 Clips
Attach the clips with their handles folded
inward. If the handles are pointed outward,
they may be hit by the machine’s presser
foot.
X This completes the positioning of the cap
in the cap frame.
k
Return the cap frame to its original position.
While pulling the lever behind the handle
on the right side of the mounting jig toward
you, rotate the cap frame to the left. After
the cap frame has been rotated 90° and the
brim points up, release the lever to lock the
cap frame in place.
1 Handle
2 Lever
l
Remove the cap frame from the mounting
jig.
To remove the cap frame from the mounting
jig, place both thumbs on the holders on the
mounting jig, grasping the handles on both
the right and left side of the cap frame, gently
pulling toward you. As shown in the
illustration.
1 Holder
2 Handle
Attaching the cap frame to the embroidery
machine
The cap frame driver is required in order to
attach the cap frame to the embroidery machine.
Before attaching the cap frame to the machine,
attach the cap frame driver to the carriage.
(Refer to “Installing the cap frame driver” on
page 260.)
Before attaching the cap frame, adjust the
position of the cap supports to fit the type (size)
of cap to be embroidered. To adjust move the
cap supports to the front or back depending on
the cap size.
1
Loosen the four screws on the cap supports
two or three turns, and then move the cap
supports to a position where tension in the
cap will be maintained.
Do not remove any of the screws,
otherwise they may be lost. Only turn the
screws to slightly loosen them.
1 Cap supports
2 Screws
3 Low profile (shorter caps)
4 Standard (taller caps)
Be sure to adjust both the right and left cap
supports to the same position.
274


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-1000 in the language / languages: English as an attachment in your email.

The manual is 29,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-1000

Brother PR-1000 User Manual - German - 320 pages

Brother PR-1000 User Manual - Dutch - 320 pages

Brother PR-1000 User Manual - French - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info