718903
16
Zoom out
Zoom in
Previous page
1/75
Next page
Chapter 1
12
f When the WIRELESS LAN indicator
stops blinking and remains lit, the printer
is connected.
Print from the printing software created
with the SDK.
NOTE
It may take more than 1 minute to
establish a wireless LAN connection.
Since it differs depending on the device
and environment, check with the device
manufacturer.
If printing is not possible
In the following cases, the wireless LAN
connection between the printer and iOS
device will be cut, preventing printing.
1 The iOS device has entered sleep
mode.
2 The printer has been turned off.
3 The printer has been switched to
USB mode.
For the cases mentioned above, perform
the operations below to re-establish the
connection.
1 Select the SSID for the ad-hoc mode
for step e on page 11.
2 Select the connection for step a on
page 11.
3 Hold down the (Power) button for at
least 3 seconds to enter wireless LAN
mode, and then select the SSID for the
ad-hoc mode for step c on page 11.
Setting Up the Printer
(With the Default Settings Changed)
1
NOTE
A computer running Windows
®
and
a USB cable are required to change
the printer’s default settings, even if the
printer will be used by an iOS device via
a wireless LAN connection. In the
process, the printer driver for a USB
connection will be installed on the
computer running Windows
®
.
In order to use the printer via a wireless
LAN connection, settings must be
specified on both the printer and the iOS
device. The printer settings will be
specified with the printer driver; however,
the settings on the iOS device must be
specified manually. Specify the settings
according to the procedures in this
manual.
With administrator rights, log onto the
computer running Windows
®
.
If, while specifying the settings, a dialog
box appears, requesting administrator
rights or requesting confirmation to
perform the operation with administrator
rights, follow the instructions.
If, while specifying the settings, a dialog
box appears, requesting confirmation to
continue the installation, continue it.
The descriptions in this manual apply to
wireless network connections that can be
set up using a standard procedures for
your operating system. For any other
cases, refer to the instruction manual
included with your wireless adapter.
a If you have the included CD-ROM, insert
it into your computer’s CD-ROM drive,
and then click [Standard Installation] in
the installer screen that appeared. If the
Web version was download, run the
downloaded file.
Click [Next].
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PJ-673 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PJ-673 in the language / languages: English as an attachment in your email.

The manual is 9,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PJ-673

Brother PJ-673 User Manual - German - 76 pages

Brother PJ-673 User Manual - Dutch - 75 pages

Brother PJ-673 User Manual - French - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info