718903
15
Zoom out
Zoom in
Previous page
1/75
Next page
Setting Up the Printer
11
1
Connecting the Printer
and iOS Device
1
NOTE
This printer can establish a connection
with the “Open System” authentication
method and when the encryption method
is set to “None” or the “WEP” ad-hoc
mode.
While connected to this printer in ad-hoc
mode, Wi-Fi cannot be used to connect
to the Internet. In addition, when the iOS
device enters sleep mode, the connection
between the printer and iOS device will
be cut.
Printing From an iOS Device
Via a Wireless LAN Connection1
The default printer settings are listed below.
It may be useful to first print a report of the
printer settings as described in Printing a
Printer Report on page 59.
SSID (network name): PJ-673_XXXX (where
“XXXX” is the last four digits
of the printer’s
serial number)
Encryption method: WEP
WEP key: Last five digits
of the printer’s
serial number
IP address: 169.254.100.1
Subnet mask: 255.255.0.0
NOTE
The serial number appears as “SER. NO.
XXXXXX-XXXXXXXXX” on the back of
the printer.
Connecting the Printer
(With the Default Settings)
1
Follow this setup method when using the
printer’s factory default settings to connect an
iOS device. To change the printer settings,
see Setting Up the Printer (With the Default
Settings Changed) on page 12.
In addition, if the printer’s wireless LAN
settings are changed, even after they had
already been specified, the connection
between the iOS device and the printer must
be re-established.
a Turn on the printer.
b Check that the POWER indicator is lit,
and then hold down (at least 3 seconds)
the (Power) button to enter wireless
LAN mode. Check that the WIRELESS
LAN indicator is blinking. For details,
see Switching Between Wireless LAN
Mode and USB Mode on page 30.
c Start Settings on the iOS device.
d Select .
If is set to [Off], change it to [On].
e A list of Wi-Fi networks (SSID) that can
be joined appears.
To establish a connection, tap the
printer’s default network (SSID) so that
a checkmark appears beside the
network (SSID). For the password, type
in the default WEP key (last five digits
of the serial number). It will take time for
the iOS device to search for the SSID
and display it. If it is not displayed, set
Wi-Fi to [Off], then to [On] again.
When printing from an iOS device,
printing software created by a software
developer will be needed in addition
to the product and services that we
provide. (We provide an SDK that can
be used.) Consult with a software
developer for printing software for the
iOS device.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PJ-673 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PJ-673 in the language / languages: English as an attachment in your email.

The manual is 9,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PJ-673

Brother PJ-673 User Manual - German - 76 pages

Brother PJ-673 User Manual - Dutch - 75 pages

Brother PJ-673 User Manual - French - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info