617737
105
Zoom out
Zoom in
Previous page
1/111
Next page
102
Contents Setting Up
Basic Sewing
Machine
Operation
Utility Stitches Embroidering
Maintenance
Troubleshooting
Error
Messages
Sewing Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory Card)
Note
* This machine comes equipped with an upper thread sensor to prevent the machine from
turning on if not properly threaded. If the machine doesn't start, check to see if the
machine is threaded properly before worrying that something might be wrong.
* If the power shuts off by itself while sewing:
Turn sewing machine off and unplug it.
Start the sewing machine again according to directions.
If you have gone through the troubleshooting tips and are still unable to find the source of the problem,
please take your machine back to the place of purchase or your nearest Brother dealer for repairs.
Needle breaks
Needle is not correctly
inserted.
Set needle properly.
Machine does
not start
“START/STOP” button is
not pressed.
Press “START/STOP”
button.
Embroidery unit
does not work
Main power switch is in
the off position.
Turn the power on.
LCD touch screen
is hard to read
LCD contrast is not
correct.
Adjust the LCD contrast.
P.34 P.23 P.12 P.13
NO NO NO
Correct needle is not
used.
Change to proper needle.
Main power switch is in
the off position.
Turn the power on.
Embroidery unit is not
correctly connected to
the machine.
Connect embroidery unit
properly to the machine.
P.34
P.12 P.63
NO NO NO
Memory card is not
inserted.
Turn off the power then
insert the memory card.
P.65
NO
Check error messages
NO
Presser foot is not
lowered.
Lower the presser foot.
P.21
P.103~105P.103~105
NO
Check error messages.
NO
The combination of fabric,
thread and needle is not
correct.
Check the “RELATED CHART
OF SEWING FABRICS,
THREAD AND NEEDLE” .
P.35
NO
The fabric is pulled too
much.
Sew without pulling but
just guide the fabric.
NO
Incorrect foot being used.
Stitch is too wide for foot
being used.
Narrow stitch or chante
foot.
NO
NO
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PE-300S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PE-300S in the language / languages: English as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info