617737
104
Zoom out
Zoom in
Previous page
1/111
Next page
101
Contents Setting Up
Basic Sewing
Machine
Operation
Utility Stitches Embroidering Maintenance
Troubleshooting
Error
Messages
Sewing Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory Card)
• Mechanical trouble
FINDING THE SOURCE OF THE PROBLEM
If you have gone through the troubleshooting tips and are still unable to find the source of the problem,
please take your machine back to the place of purchase or your nearest Brother dealer for repairs.
Inability to thread
needle
Needle position is not
correct.
Set needle at proper
position using “NEEDLE
POSITION” button.
Inability for thread
tension control
Upper threading is not
correct.
Re-thread upper thread.
Embroldered pattern
is out of shape
The fabric has been
placed in the embroidery
frame incorrectly.
Place the fabric in the
embroidery frame
correctly.
Fabric is not fed
properly
Feed dog is lowered.
Raise the feed dog with
the feed dog adijustment
lever.
P.20 P.20~22 P.75~76 P.61
NO NO NO NO
Hook of needle threader
does not fit into the eye
of the needle.
Set needle at proper
position using “NEEDLE
POSITION” button.
Set of bobbin thread is
not correct.
Set bobbin properly and
pull out the bobbin thread.
Thin or stretch fabric is
being used with no
stabilizer fabric attached.
Attach stabilizer fabric.
Stitch length is set at no
feeding.
Set stitch length properly.
P.20
P.19 P.74 P.27~29
NO NO NO NO
The embroidery frame
has been attached to the
machine incorrectly.
Attach the embroidery
frame to the machine
correctly.
The combination of
selected stitch and
presser foot is not correct.
Change presser foot to
correct one.
P.77
P.103
NO NO
Thread is entangled.
Remove thread- ends in
the race or inner shuttle.
Correct needle is not
being used.
Change to proper needle.
P.97~98 P.34
NO NO
Combination of fabric,
thread and needle is not
correct.
Check “RELATED CHART
OF SEWING FABRICS,
THREAD AND NEEDLE”.
P.35
NO
Presser foot holder is not
properly attached.
Reattach presser foot
holder properly.
NO
Upper thread tension is
too tight.
Reduce thread tension
by turning tension dial.
P.30
NO
Thread is entangled.
Remove thread- ends in
the race or inner shuttle.
P.97~98
NO
Trouble with threads and stitches
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PE-300S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PE-300S in the language / languages: English as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info