480649
47
Zoom out
Zoom in
Previous page
1/104
Next page
44
4. Lower the buttonhole lever and position it behind the metal
bracket on the buttonhole foot.
1 Metal bracket on the buttonhole foot
Keyhole buttonhole
Make a hole using the small eyelet punch in the key end, then
insert a pin in front of the inside edge of the bar tack. Insert a
seam ripper into the hole made with the eyelet punch and cut
towards the pin.
1 Small eyelet punch (accessory #9 on page 6)
2 Pin
5. While lightly holding the end of the upper thread, press the
START/STOP button to start sewing.
* Gently feed the fabric by hand.
* Before stopping, the machine will automatically sew a rein-
forcement stitch after the buttonhole is sewn.
* If the fabric does not feed (for example, because the fabric is
too thick), touch the
stitch length key to increase the
stitch length.
6. Open the buttonhole.
Normal buttonhole and rounded buttonhole
Insert a pin in front of the inside edge of both bar tacks. Insert the
seam ripper into the center of the buttonhole and cut toward the
first pin, then cut toward the other pin.
1 Pin
6
5
1
6
5
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PC 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PC 3000 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info