480649
46
Zoom out
Zoom in
Previous page
1/104
Next page
43
BUTTONHOLE STITCHING
12:For horizontal holes on blouses or
shirts made from thin or medium fab-
ric
13: For thin or medium fabric
14: For jeans or stretch fabric with a coarse
weave
15: For stretch fabric
16: For suits or overcoats
17: For jeans or trousers
18: For thick coats
1. Mark the positions of the buttonholes on the fabric.
* The maximum buttonhole length is 3 cm (1-13/64") (total of
diameter + thickness of button).
* Thick thread (#30) cannot be used with the
14
and
15
buttonhole styles.
2. Attach presser foot A, then pull out the button holder plate
and insert the button.
1 Button holder plate
* The size of the buttonhole is determined by the button inserted
in the button holder plate.
Note
The thread should be passed through the hole in the presser foot,
then be placed under the foot.
3. Raise the presser foot and adjust the fabric so that the red
marks on the foot align with the starting mark for your button-
hole, then lower the presser foot.
1 Mark on fabric for buttonhole position
2 Red marks on presser foot
* After the presser foot lever has been lowered, ad-
just the presser foot so that there is no gap behind
the section that is shaded in the illustration at the
right. Otherwise, the size of the stitch will not be correct. To
adjust the presser foot, push the presser foot towards the back
of the machine as shown in the figure at the left.
Note
Before sewing a buttonhole on your project, practice on a scrap piece of the same type of fabric.
A
13
16
17
18
14
15
12
6
5
A
6
5
1
A
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PC 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PC 3000 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info