451209
91
Zoom out
Zoom in
Previous page
1/130
Next page
Troubleshooting and Routine Maintenance
81
Transferring your faxes or Fax
Journal report B
If the LCD shows:
Change Unable XX
Clean Unable XX
Init Unable XX
Print Unable XX
Scan Unable XX
we recommend transferring your faxes to
another fax machine. (See Transferring faxes
to another fax machine on page 82.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine on page 82.)
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Not Registered
You tried to access a Speed Dial
number that is not programmed.
Set up the Speed Dial number. (See Storing
Speed-Dial numbers on page 41.)
Out of Memory The machine's memory is full. Fax sending or copy operation in progress
Press Stop/Exit and wait until the other
operations in progress finish and then try
again.
Clear the data from the memory. To gain
extra memory, you can turn off Fax Storage.
(See Turning off Remote Fax
Options on page 45.)
Print the faxes that are in the memory. (See
Printing a fax from the memory on page 31.)
Printing operation in progress
Reduce print resolution. (For details, see
Printing for Windows
®
or Printing and Faxing for
Macintosh
®
in the Software User's Guide on the
CD-ROM.)
Paper Jam Paper is jammed in the machine. Open the upper and lower jam clear covers (at
the back of the machine) and remove the
jammed paper. (See Printer jam or paper
jam on page 83.)
Print Unable XX
Scan Unable XX
The machine has a mechanical
problem.
—OR
A foreign objects such as a clip or
ripped paper is in the machine.
Open the upper jam clear cover and remove any
foreign objects inside the machine.
If the error message continues, see Transferring
your faxes or Fax Journal report on page 81
before disconnecting the machine so you will not
lose any important messages. Then, disconnect
the machine from the power for several minutes
and then reconnect it.
Wrong Paper Size
Paper is not the correct size. Load the correct size of paper (Letter, Legal or
A4), and then press Mono Start or Colour Start.
Error Message Cause Action
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother MFC-3360C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother MFC-3360C in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother MFC-3360C

Brother MFC-3360C Installation Guide - English - 23 pages

Brother MFC-3360C User Manual - German - 135 pages

Brother MFC-3360C Installation Guide - German - 23 pages

Brother MFC-3360C Installation Guide - Dutch - 23 pages

Brother MFC-3360C User Manual - Dutch - 131 pages

Brother MFC-3360C Installation Guide - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info