Manual Brother LS1217 (page 57 of 81) (English, French, Portuguese, Spanish)

555741

Zoom out

Zoom in

1/81

CONTENTS INDEXMAINTENANCE

KNOWING YOUR

SEWING MACHINE

STRAIGHT AND

ZIGZAG STITCHING

BUILT-IN STITCHES

BUTTONHOLE AND

BUTTON SEWING

USING ATTACHMENTS

AND APPLICATIONS

Appliques

STITCH LENGTH F-2

STITCH WIDTH 1-3

NEEDLE POSITION M

PRESSER FOOT Zigzag

NEEDLE Single

An applique is created by cutting a contrasting piece of fabric into a

shape to be used as a decoration on a garment or project.

1. Baste the cut design to the fabric in the location where desired.

2. Carefully sew around the edge of the cutout design with a Zigzag

Stitch in the short stitch length.

1 Applique stitching

3. Cut away the surplus fabric outside of the stitching.

4. Remove the basting, if necessary.

NOTE:

Make reinforcing Straight Stitches at the beginning and the end of the

stitching to secure your work.

Appliques

LONGUEUR DE POINT F-2

LARGEUR DE POINT 1-3

POSITION DE L’AIGUILLE M

PIED-DE-BICHE Zigzag

AIGUILLE Simple

Pour créer une applique, découper une forme dans un morceau de

tissu contrastant et s’en servir pour décorer un vêtement ou un ouvrage.

1. Faufiler le motif découpé à l’endroit désiré sur le tissu.

2. Coudre soigneusement le long du motif découpé en points zigzag

avec une petite longueur de point.

Couture de l’applique

3. Couper la partie du tissu dépassant de la couture.

4. Défaufiler si nécessaire.

REMARQUE:

Renforcer la couture à l’aide de points droits aux deux extrémités pour

que celle-ci ne se défasse pas.

Aplicaciones

LARGO DE PUNTADA F-2

ANCHO DE PUNTADA 1-3

POSICIÓN DE LA AGUJA M

PRENSATELAS Zigzag

AGUJA Simple

Una aplicación se crea cortando un trozo de tejido que haga con-

traste con una forma determinada para utilizarlo como decoración

en una prenda.

1. Hilvane la aplicación recortada al tejido donde desee ponerla.

2. Cosa cuidadosamente los bordes del diseño con una puntada

zigzag en un largo de puntada fino.

1 Costura de aplicaciones

3. Recorte el tejido sobrante que quede fuera del pespunte.

4. Quite los hilvanes si fuera necesario

NOTA:

Cosa unas puntadas rectas al principio y al final de las puntadas

para reforzar las costuras.

Appliques

COMPRIMENTO DO PONTO F-2

LARGURA DO PONTO 1-3

POSIÇÃO DA AGULHA M

PÉ CALCADOR Para Zigzag

AGULHA Simples

Um aplique pode ser criado recortando-se uma peça de tecido contrastante

dentro de um formato para ser usado como decoração numa roupa ou proje-

to.

1. Alinhave o motivo recortado ao tecido na posição desejada.

2. Costure cuidadosamente em torno da borda do motivo recortado com

um Ponto em Zig-Zag no comprimento de ponto curto.

1 Costura de Apliques

3. Corte o tecido excedente para fora da costura.

4. Remova o alinhavo, se necessário.

NOTA:

Faça Pontos Retos de reforço no início e no término da costura para prender

o seu trabalho.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1217 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother LS1217 Manual

Product: