555741

Brother LS1217 Manual

31
Zoom out
Zoom in
Previous page
1/81
Next page
21
CONTENTS INDEXMAINTENANCE
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
A-1A
2
1
2
1
0
1
2
3
4
5
6
7
8
9
B-1B
2
1
2
1
0
1
2
3
4
5
6
7
8
9
Thread Tension
Thread tension will affect the quality of your stitches. It may need to be
adjusted when you change fabric or thread type.
NOTE:
It is recommended that a test sample be made on a fabric scrap before
sewing on your project.
The basic thread tension setting is “5”.
Possible Problems and How To Correct Them
A Upper tension is too tight.
Loops appear on the surface of the fabric.
A-1 Upper tension control dial
Decrease the tension by turning the dial to a lower number.
B Upper tension is too loose.
Loops appear on the reverse side of the fabric.
B-1 Upper tension control dial
Increase the tension by turning the dial to a higher number.
1 Reverse
2 Surface
Tension du fil
La tension du fil aura un effet sur la qualité de vos points. Il est parfois
nécessaire de la régler lors du changement de tissu ou de fil.
REMARQUE :
Il est recommandé de faire un essai sur une chute de tissu avant de
coudre l’ouvrage proprement dit.
La tension du fil est réglée par défaut sur “5”.
Problèmes possibles et comment les résoudre
A La tension supérieure est excessive.
Des boucles apparaissent à la surface du tissu.
A-1 Sélecteur de tension supérieure
Diminuer la tension en mettant le sélecteur sur un chiffre inférieur.
B La tension supérieure est insuffisante.
Des boucles apparaissent sur l’envers du tissu.
B-1 Sélecteur de tension supérieure
Augmenter la tension en plaçant le sélecteur sur un chiffre plus
élevé.
1
Envers
2
Endroit
Tensión de los hilos
La tensión de los hilos es muy importante para la calidad de las
puntadas y puede requerir un ajuste al cambiar de tejido o de hilo.
NOTA:
Le recomendamos que haga una prueba en un pedazo de tela antes
de empezar a coser con el tejido de trabajo.
El parámetro inicial de tensión del hilo es “5”.
Problemas posibles y sus soluciones
A El hilo superior está demasiado tirante.
Aparecen bagas en la superficie del tejido.
A-1 Disco de control de la tensión superior
Disminuya la tensión colocando el disco en un número inferior.
B La tensión superior es insuficiente.
Aparecen bagas en el revés del tejido.
B-1 Disco de control de la tensión superior
Aumente la tensión colocando el disco en un número superior.
1 Revés
2 Derecho
Tensão da Linha
A tensão da linha afetará a qualidade dos seus pontos. Pode ser necessário
regulá-la quando mudar o tipo de tecido ou de linha.
NOTA:
Recomenda-se efetuar um teste de amostra num pedaço de tecido antes de
costurar no seu projeto.
O ajuste básico de tensão da linha é “5”.
Possíveis Problemas e Como Corrigi-los
A Linha superior excessivamente tensa.
Laços se formam no lado da frente do tecido.
A-1 Disco de controle da tensão superior
Diminua a tensão, girando o disco até um número menor.
B Tensão superior insuficiente.
Laços aparecem no lado avesso do tecido.
B-1 Disco de controle da tensão superior
Aumente a tensão, girando o disco até um número maior.
1 Avesso do tecido
2 Frente do tecido
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS1217 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1217 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info