555741

Brother LS1217 Manual

29
Zoom out
Zoom in
Previous page
1/81
Next page
19
CONTENTS INDEXMAINTENANCE
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
Twin-Needle Sewing
Your sewing machine is designed for twin needle sewing, which al-
lows you to sew using two upper threads. You can use the same color
or two different colors of thread for decorative stitches. Be sure that the
two upper threads used for threading the twin needle have the same
weight. If the threads do not have the same weight, the stitching may
not be consistent.
INSERTING THE TWIN NEEDLE
Insert the twin needle in the same way that a single needle is inserted.
(See note.) The flat side of the needle should face toward the back and
the rounded side should face toward you.
SETTING THE EXTRA SPOOL PIN
Place the extra vertical spool pin in the hole found on top right-hand
side of the machine. Place the second spool of thread on this pin as
shown in fig. A.
TWIN NEEDLE THREADING
Each needle should be threaded separately.
1. Threading the Right Needle
Follow the same instructions for single needle threading. See page
13 for more details.
2. Threading the Left Needle
Thread the left needle in the same way as the right needle was
threaded, but do not pass the thread through the thread guide above
the needle before passing it through the eye of the left needle as
shown in fig. B.
2 Right needle thread passes through this guide.
3 Left needle thread passes in front of this guide.
NOTE:
1. Use the zigzag presser foot.
2. Use a setting of less than 3 on the stitch width knob.
3. Set the needle position selector to M.
Couture avec l’aiguille jumelée
Cette machine à coudre a été conçue afin de coudre à l’aide d’une
aiguille jumelée, ce qui permet l’utilisation de deux fils supérieurs. Il
est possible d’utiliser la même couleur de fil ou deux couleurs diffé-
rentes pour des points fantaisie. S’assurer que les deux fils supérieurs
utilisés avec l’aiguille jumelée sont de la même épaisseur. Dans le cas
contraire, les points ne seronts pas nécessairement égaux.
MISE EN PLACE DE L’AIGUILLE JUMELÉE
Introduire l’aiguille jumelée de la même façon que l’aiguille normale.
(Voir remarque). Le côté plat de l’aiguille doit être tourné vers l’arrière
et le côté arrondi doit faire face à l’utilisateur.
MISE EN PLACE DU PORTE-BOBINE SUPPLEMENTAIRE
Placer le porte-bobine vertical supplémentaire dans l’orifice en haut et
à droite de la machine. Placer la deuxième bobine de fil sur ce porte-
bobine comme l’indique la fig. A.
ENFILAGE DE L’AIGUILLE JUMELÉE
Chaque aiguille doit être enfilée séparément.
1. Enfilage de l’aiguille droite
Suivre les mêmes instructions que pour l’aiguille normale. Voir page
13 pour plus de détails.
2. Enfilage de l’aiguille gauche
Enfiler l’aiguille gauche de la même manière que l’aiguille droite,
mais sans faire passer le fil par le guide-fil situé au-dessus de
l’aiguille. Le faire passer directement par le chas de l’aiguille gau-
che comme l’indique la fig. B.
2
Le fil de l’aiguille droite passe par ce guide.
3
Le fil de l’aiguille gauche passe devant ce guide.
REMARQUE
:
1. Utiliser le pied-de-biche zigzag.
2. Sélectionner un réglage inférieur à 3 sur le sélecteur de largeur de
point.
3. Mettre le sélecteur de position d’aiguille sur M.
AB
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS1217 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS1217 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info