631286
38
Zoom out
Zoom in
Previous page
1/68
Next page
29
Shell Tuck Stitching
The Shell Tuck Stitch can be used to sew a picot (lace-like) edge
on a lightweight fabric.
1. Set the pattern selection dial to 13.
2. Use a tighter thread tension than normal.
3. At a slow speed, sew the fabric on the bias, placing it under
the presser foot so that the straight stitches are sewn on the
seamline and the zigzag stitches are sewn slightly over the
folded edge.
Pattern
13 (Shell Tuck Stitch)
Point picot
Utiliser ce point pour réaliser une lisière à picot (semblable à de
la dentelle) sur un tissu léger.
1. Mettre le sélecteur de modèle de point sur 13.
2. La tension du fil supérieur doit être légèrement plus forte que
la normale.
3. Coudre lentement le tissu sur le biais après l’avoir placé sous
le pied-de-biche de sorte que la machine puisse coudre des
points droits sur la ligne de couture et des points zigzag
légèrement au-dessus du bord replié.
Modèle
13 (Point picot)
Puntada ondas
La puntada ondas puede usarse para coser una puntilla (como
encaje) en un tejido fino.
1. Ponga el selector de puntadas en 13.
2. Este trabajo requiere aumentar un poco más la tensión de hilo que
en condiciones normales.
3. Cosa lentamente el tejido en el sesgo, situándolo debajo del
prensatelas de tal forma que las puntadas rectas se cosan en la
línea de la costura y que las puntillas de las puntadas zigzag
sobrepasen ligeramente el borde doblado.
Número de puntada
13 (Puntada ondas)
СтрочкаRракушка
Строчка-ракушка может использоваться для шитья зубчатого
(похожего на кружево) края на тонких тканях.
1. Установите ручку выбора строчки в положение “13”.
2. Настройте натяжение нити таким образом, чтобы оно
было несколько сильнее обычного
3. На небольшой скорости шейте ткань, сложенную по
косой, размещая её под прижимной лапкой таким
образом, чтобы прямые стежки были расположенными
вдоль шва, а зигзагообразные стежки слегка заходили за
край сгиба.
Положение ручки выбора вида строчки
13 (Строчка-ракушка)
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother LS-3125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother LS-3125 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info