718836
38
Zoom out
Zoom in
Previous page
1/72
Next page
36
UTILITY STITCHES
e
Select a stitch . (With models not provided
with stitch , select stitch .)
f
Adjust the stitch width so that it is the same as
the distance between the holes in the button.
g
Set the stitch length to the shortest setting by
pressing the stitch length adjustment key.
h
Turn the handwheel toward you
(counterclockwise) to check that the needle
correctly goes into the two holes of the button.
Adjust the stitch width to the distance between
the button holes.
i
Start sewing.
After sewing for about 10 seconds at low
speed, press (reverse/reinforcement stitch
button) to sew reinforcement stitches.
j
Pull the upper thread at the end of the stitching
to the wrong side of the fabric, and then tie it
with the bobbin thread.
Use scissors to cut the upper thread and the
bobbin thread at the beginning of the stitching.
k
When you are finished attaching the button,
slide the feed dog position lever to and
turn the handwheel to raise the dogs.
Normally, the feed dog position lever is
positioned at .
You can use the zipper foot to sew different types of zippers,
and can easily position it to the right or left side of the needle.
a
Attach zigzag foot “J”.
b
Place the two pieces of fabric with their right
sides facing each other.
c
Sew basic stitches to the end of the zipper
opening, and then sew reverse stitches at the
end of the stitching.
Use basting stitching to sew the zipper opening
(where the zipper will be inserted).
Refer to “Basic stitching” on page 30.
d
Open the seam allowance, press it from the
wrong side of the fabric with an iron, align the
center of the zipper with the stitching, and then
baste the zipper in place.
a Wrong side of fabric
b Basting stitching
c Zipper
CAUTION
When sewing, be sure that the needle does not
touch the button, otherwise the needle may
bend or break.
ZIPPER INSERTION
Stitch Name
Pattern
Presser Foot
Pattern No.
100 stitches
model
80/90 stitches
model
60/70 stitches
model
50 stitches
model
40 stitches
model
30 stitches
model
20 stitches
model
Straight stitch
(center)
I 01010101010101
CAUTION
Be sure to turn off the main power before replacing
the presser foot. Otherwise, injuries may occur if
the foot controller or (start/stop button) is
accidentally pressed and the machine starts sewing.
a Basting stitching
b Reverse stitches
c Wrong side of fabric
d End of zipper opening
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KE20 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KE20

Brother KE20 User Manual - German - 72 pages

Brother KE20 User Manual - Dutch - 72 pages

Brother KE20 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info