718836
36
Zoom out
Zoom in
Previous page
1/72
Next page
34
UTILITY STITCHES
f
Position the fabric with the front end of the
buttonhole mark aligned with the red marks on
the sides of the buttonhole foot, and then lower
the presser foot lever.
a Mark on fabric
b Red marks on buttonhole foot
When lowering the presser foot, do not push in
the front of the presser foot, otherwise the
buttonhole will not be sewn with the correct size.
a Do not reduce the gap.
g
Pull down the buttonhole lever as far as
possible.
a Buttonhole lever
b Bracket
The buttonhole lever is positioned behind the
bracket on the buttonhole foot.
h
Gently hold the end of the upper thread in your
left hand, and then start sewing.
Note
If thick seams are being sewn and the fabric does
not feed, sew with the coarser (longer) stitch.
Once sewing is completed, the machine
automatically sews reinforcement stitches,
then stops.
i
Raise the needle and the presser foot lever,
remove the fabric, and cut the thread.
j
Raise the buttonhole lever to its original
position.
k
Insert a pin at the end of the buttonhole
stitching to prevent the stitching from being cut,
and then use a seam ripper to cut towards the
pin and open the buttonhole.
For keyhole buttonholes, use a commercial
eyelet punch to make a hole in the rounded end
of the buttonhole, and then use the seam ripper
to cut open the buttonhole.
When using the eyelet punch, place thick
paper or some other protective sheet under the
fabric before punching the hole in the fabric.
Memo
Before sewing buttonholes, check the stitch length
and width by sewing a trial buttonhole on a scrap
piece of fabric.
A
1
2
2
CAUTION
When opening the buttonhole with the seam
ripper, do not place your hands in the cutting
path, otherwise injuries may result if the seam
ripper slips. Do not use the seam ripper in any
other way than how it is intended.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KE20 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KE20

Brother KE20 User Manual - German - 72 pages

Brother KE20 User Manual - Dutch - 72 pages

Brother KE20 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info