718836
16
Zoom out
Zoom in
Previous page
1/72
Next page
14
KNOWING YOUR SEWING MACHINE
e
Hold the end of the thread, push the bobbin
down with your finger, and then pass the thread
through the slit, as shown.
If the thread is not correctly inserted, it may
cause incorrect thread tension (page 26).
f
Replace the bobbin cover.
Replace the cover so that the end of the thread
comes out from the left side of the cover (as
shown by the line in the diagram).
For models equipped with the quick-set bobbin
Memo
The direction for feeding the bobbin thread is
indicated by marks on the needle plate cover. Be
sure to thread the machine as indicated.
a
Raise the needle to its highest position by turning
the handwheel toward you (counterclockwise) or
press (needle position button) (for models
equipped with the needle position button), and
raise the presser foot lever.
b
Turn off the sewing machine.
c
Slide the button and open the cover.
d
Put the bobbin in so the thread comes out in the
direction shown by the arrow.
e
While lightly holding down the bobbin, guide
the thread through the slit (
a and b).
At this time, check that the bobbin easily
rotates counterclockwise.
Then, pull the thread toward you to cut it with
the cutter (
c).
Note
If the thread is not correctly inserted through the
tension-adjusting spring of the bobbin case, it may
cause incorrect thread tension (page 26).
a Tension-adjusting spring
CAUTION
Make sure you set the bobbin so the thread unrolls
in the right direction. If the thread unrolls in the
wrong direction, it may cause the thread tension to
be incorrect or break the needle.
CAUTION
Make sure you set the bobbin so the thread unrolls in the right
direction. If the thread unrolls in the wrong direction, it may
cause the thread tension to be incorrect or break the needle.
12
a Slit
b Cutter
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KE20 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KE20

Brother KE20 User Manual - German - 72 pages

Brother KE20 User Manual - Dutch - 72 pages

Brother KE20 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info