718836
15
Zoom out
Zoom in
Previous page
1/72
Next page
13
1
f
Turn on the sewing machine.
g
Press the foot controller or press (start/stop
button) (for models equipped with the start/stop
button) to start.
Note
If the sewing machine is to be operated using the
foot controller, connect the foot controller before
turning on the machine.
When the foot controller is plugged in, the start/
stop button cannot be used to start sewing (only for
models equipped with the start/stop button).
h
When the bobbin begins spinning slowly, take
your foot off the foot controller or press
(start/stop button) (for models equipped with
the start/stop button).
i
Cut the thread, slide the bobbin winder shaft to
the left, and then remove the bobbin from the
shaft.
j
Slide the sewing speed controller back to its
original position (for models equipped with the
sewing speed controller).
Memo
When the sewing machine is started or the
handwheel is turned after winding the thread
around the bobbin, the machine will make a
clicking sound; this is not a malfunction.
The needle bar does not move when you slide the
bobbin winding shaft to the right.
Install the bobbin wound with thread.
For more details on quick-set bobbin, see page 14.
Memo
The direction for feeding the bobbin thread is
indicated by marks on the needle plate cover. Be
sure to thread the machine as indicated.
a
Raise the needle to its highest position by turning
the handwheel toward you (counterclockwise) or
press (needle position button) (for models
equipped with the needle position button), and
raise the presser foot lever.
b
Turn off the sewing machine.
c
Slide the button and open the cover.
d
Put the bobbin in so the thread comes out in the
direction shown by the arrow.
Lower threading
CAUTION
Winding the bobbin improperly may cause the
thread tension to loosen, breaking the needle
and resulting in injury.
a Wound evenly
b Wound poorly
Make sure you turn the power off while
threading the machine. If you accidentally step
on the foot controller and the machine starts to
sew, you could be injured.
12
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KE20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KE20 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KE20

Brother KE20 User Manual - German - 72 pages

Brother KE20 User Manual - Dutch - 72 pages

Brother KE20 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info