718712
41
Zoom out
Zoom in
Previous page
1/72
Next page
39
3
You can create an appliqué by cutting a different piece of
fabric into a shape and using it as a decoration.
a
Baste the cut design to the fabric.
b
Attach zigzag foot “J”.
c
Select stitch .
d
Sew along the edge of the fabric with the needle
dropping off the edge at the right.
a Appliqué fabric
b Needle drop point
e
Remove the basting, if necessary.
Memo
Make reinforcing straight stitches at the beginning
and the end of stitching.
a
Fold the edge of the top piece of fabric and
place it over the lower piece.
b
Sew the two pieces of fabric together so the
pattern spans both pieces.
Sewing together two pieces of fabric is called “piecing”. The
fabric pieces should be cut with a 6.5 mm (1/4 inch) seam
allowance.
Sew a piecing straight stitch 6.5 mm (1/4 inch) from either the
right side or the left side of the presser foot.
a
Baste or pin along the seam allowance of the
fabric that you wish to piece together.
b
Attach zigzag foot “J”.
c
Select stitch or
.
d
Sew with the side of the presser foot aligned
with the edge of the fabric.
For a seam allowance on the right side
Align the right side of the presser foot with the
edge of the fabric, and sew using stitch .
For a seam allowance on the left side
Align the left side of the presser foot with the
edge of the fabric, and sew using stitch .
Memo
To change the width of the seam allowance (the
needle position), adjust the stitch width. For details,
refer to “Changing the needle position” (page 30).
Sandwiching batting between the top and bottom layers of
fabric is called “quilting”. Quilts can easily be sewn using the
optional walking foot and the optional quilting guide.
Note
Only use the walking foot with straight or zigzag
stitches. Do not use other patterns. Reverse stitches
cannot be sewn with the walking foot.
Appliqués
CAUTION
If glue is used to hold the cut design in place on
the fabric, do not apply glue to areas that will be
sewn with the machine. If glue is attached to the
needle or race, the machine may be damaged.
CAUTION
Be careful that the needle does not hit a pin
during sewing, as the needle can break. You
may also be injured.
Patchwork (crazy quilt) stitching
Piecing
Quilting
1
1
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KD40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KD40 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KD40

Brother KD40 User Manual - German - 72 pages

Brother KD40 User Manual - Dutch - 72 pages

Brother KD40 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info