718712
39
Zoom out
Zoom in
Previous page
1/72
Next page
37
3
e
Attach the presser foot holder to the right side
of the pin on zipper foot “I”.
f
Select stitch .
g
With the right side of the fabric facing up,
continue sewing with the zipper on the right
side of the presser foot.
Sew the stitching in order, from
a to c.
Memo
If the presser foot contacts the zipper slider, leave
the needle lowered (in the fabric) and raise the
presser foot. After moving the slider so it will not
contact the presser foot, lower the presser foot and
continue sewing.
To sew with the zipper on the left side of the presser
foot, attach the presser foot holder to the left side of
the pin on zipper foot “I” in step
e.
h
When you have finished sewing, remove the
basting stitching.
Stretch fabrics can be sewn and elastic tape can be
attached.
Observe the corresponding precautions when
performing each of the following stitching operations.
CAUTION
Turn the handwheel by hand to make sure the
needle does not hit the presser foot before you
start sewing. If you choose a different stitch, the
needle will hit the presser foot and break the
needle. You may also be injured.
CAUTION
Make sure the needle does not hit the zipper
during sewing. If the needle hits the zipper, the
needle may break and you may be injured.
I
a Pin on the right side
b Needle drop point
a Stitching
b Right side of fabric
c Basting stitching
d End of zipper opening
SEWING STRETCH FABRICS
AND ELASTIC TAPE
Stitch Name
Pattern
Presser Foot
Pattern No.
100 stitches
model
80/90 stitches
model
60/70 stitches
model
50 stitches
model
40 stitches
model
30 stitches
model
20 stitches
model
Stretch stitch J 03030303030303
3-point
zigzag stitch
J 05050505050505
Elastic-attach-
ing stitch
J2121-----
CAUTION
Be sure to turn off the main power before
replacing the presser foot. Otherwise, injuries
may occur if the foot controller or (start/
stop button) is accidentally pressed and the
machine starts sewing.
I
a Left side of the pin
b Needle drop point
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother KD40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother KD40 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother KD40

Brother KD40 User Manual - German - 72 pages

Brother KD40 User Manual - Dutch - 72 pages

Brother KD40 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info