631249
61
Zoom out
Zoom in
Previous page
1/84
Next page
50
USING ATTACHMENTS AND APPLICATIONS
LISÄVARUSTEET JA -TOIMINNOT
USO DE ACCESORIOS Y APLICACIONES
ДОПОЛНИТЕЛЬНЫЕ ШВЕЙНЫЕ ОПЕРАЦИИ
Пришивание шнура
ДЛИНА СТЕЖКА F-2
ШИРИНА СТРОЧКИ Настройка по толщине шнура.
ПОЛОЖЕНИЕ ИГЛЫ M
ПРИЖИМНАЯ ЛАПКА Для строчки “зигзаг”
ИГЛА Одинарная
1. Регулятором установите ширину строчки чуть больше
толщины шнура.
2. Положите шнур на ткань в том месте, где его нужно пришить.
3. Опустите прижимную лапку, убедитесь, что шнур проходит
посередине лапки, и начинайте шить строчкой “зигзаг”. Рукой
направляйте шнур вдоль линии, по которой его нужно
пришить.
Cording
STITCH LENGTH F-2
STITCH WIDTH Set according to the thickness of the cord
being used.
NEEDLE POSITION M
PRESSER FOOT Zigzag
NEEDLE Single
1. Set the stitch width knob so the needle will just clear both sides of
the cording.
2. Place the cord on the fabric in the position where it will be sewn.
3. Lower the presser foot making sure the cord is centered and sew
using the zigzag stitch. Guide the cord by hand along the path
which you wish to attach it.
Nyörien ompeleminen
PISTON PITUUS F-2
PISTON LEVEYS Aseta nyörin paksuuden mukaan.
NEULA-ASENTO M
PAININJALKA Siksak
NEULA Tavallinen neula
1. Aseta piston leveysnuppi siten, että neula ohittaa nyörin juuri ja
juuri kummaltakin puolelta.
2. Aseta nyöri kankaalle paikkaan, johon haluat ommella sen.
3. Laske paininjalka ja varmista, että nyöri on keskellä. Ompele
siksakpistoin. Ompele nyöri haluamaasi kohtaan ohjaten nyöriä
käsin.
Costura de cordón
Largo de puntada F-2
Ancho de puntada Ajuste de acuerdo con el grosor del cordón
Posición de la aguja M
Prensatelas Zigzag
Aguja Simple
1. Ajuste el ancho de la puntada para que la aguja pase justo por
ambas partes del cordón.
2. Coloque el cordón en el tejido donde debe coserse.
3. Baje el prensatelas y asegúrese de que el cordón está centrado
y cosa con puntadas zigzag. Guíe el cordón con la mano a lo
largo del trayecto donde quiere fijarlo.
08C713_XE4683-001_P42-52 2008.04.02, 09:3350
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother JS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother JS-20 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info