631249
49
Zoom out
Zoom in
Previous page
1/84
Next page
38
BUTTONHOLE AND BUTTON SEWING
NAPINLÄPIEN JA NAPPIEN OMPELEMINEN
OJALES Y COSTURA DE BOTONES
ОБМЕТЫВАНИЕ ПЕТЕЛЬ И ПРИШИВАНИЕ ПУГОВИЦ
OPTIONAL PROCEDURE FOR BUTTONHOLES
Step A: Bar Tack
1. Set the needle position at L, stitch width at 5 and stitch length at 0.
2. Lower the presser foot and sew 3 to 4 stitches.
3. Stop the machine when the needle is in the fabric and at the left
side of the stitches. (position A)
Step B: Left Row
1. Set the stitch width at 2 and stitch length at F.
2. Sew the desired length in reverse.
3. Stop the machine when the needle is in the fabric at the left side of
the stitches. (position B)
Step C: Final Bar Tack
1. Set the stitch width at 5 and stitch length at 0.
2. Sew 3 to 4 stitches.
3. Stop the machine when the needle is in the fabric and at the right
side of the stitches. (position C)
Step D: Right Row
1. Set the needle position at R, stitch width at 2 and stitch length at F.
2. Sew until the needle reaches the other bar tack.
3. Stop the machine when the needle is in the fabric and at the right
side of the stitches. (position D)
Step E: Securing Buttonhole Stitch
1. To secure stitching, set the stitch width to 0. Turn the fabric 90
degrees counterclockwise and sew 5 - 6 straight stitches. (fig. E)
2. Remove the fabric from the machine.
VAIHTOEHTOINEN NAPINLÄVEN OMPELUTOIMENPIDE
Vaihe A: Salpapistot
1. Aseta neulan asento arvoon L, piston leveys arvoon 5 ja piston
pituus arvoon 0.
2. Laske paininjalka ja ompele 3-4 pistoa.
3. Pysäytä kone, kun neula on kankaassa ja pistojen vasemmassa reu-
nassa (kohdassa A).
Vaihe B: Vasen reuna
1. Aseta piston leveys arvoon 2 ja piston pituus arvoon F.
2. Ompele haluttu määrä pistoja taaksepäin.
3. Pysäytä kone, kun neula on kankaassa ja pistojen vasemmassa reu-
nassa (kohdassa B).
Vaihe C: Viimeiset salpapistot
1. Aseta piston leveys arvoon 5 ja piston pituus arvoon 0.
2. Ompele 3-4 pistoa.
3. Pysäytä kone, kun neula on kankaassa ja pistojen oikeassa reunas-
sa (kohdassa C).
Vaihe D: Oikea reuna
1. Aseta neulan asento arvoon R, piston leveys arvoon 2 ja piston
pituus arvoon F.
2. Ompele, kunnes neula saavuttaa toiset salpapistot.
3. Pysäytä kone, kun neula on kankaassa ja pistojen oikeassa reunas-
sa (kohdassa D
).
Vaihe E: Näpinläven vahvistaminen
1. Vahvista pistot asettamalla piston leveysasetukseksi 0. Käännä kan-
gasta 90 astetta vastapäivään ja ompele 5-6 suoraa ommelta (kuva
E).
2. Ota kangas pois koneesta.
A
B
C
D
(E)
08C713_XE4683-001_P36-41 2008.04.02, 09:3238
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother JS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother JS-20 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info