631248
110
Zoom out
Zoom in
Previous page
1/116
Next page
APPENDIX
108
The thread
tension is
incorrect.
The upper thread is incorrectly
installed.
Correct the upper threading. page 20
The bobbin thread is incorrectly
installed.
Correct the bobbin threading. page 18
The bobbin thread is incorrectly
wound.
Correctly wind the bobbin. page 15
The combination of fabric, thread and
needle is incorrect.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 30
The presser foot holder is incorrectly
installed.
Correctly install the presser foot
holder.
page 35
The thread tension is incorrectly set. Adjust the thread tension. page 49
A bobbin designed specifically for
this machine is not used.
Bobbins from older models, which
have a different thickness, will not
work properly. Only use a bobbin
designed specifically for this
machine.
page 15
The fabric is
puckered.
The upper thread or bobbin thread is
incorrectly installed.
Correctly thread the upper thread and
correctly install the bobbin thread.
page 18,
20
The spool is incorrectly installed. Correctly install the spool. page 15
The combination of fabric, thread and
needle is incorrect.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 30
The needle is bent or blunt. Replace the needle with a new one. page 31
If thin fabrics are being sewn, the
stitch is too long or the fabric is not
being fed correctly.
Sew with stabilizer material under the
fabric.
page 51
The thread tension is incorrectly set. Adjust the thread tension. page 49
Stitches are
skipped.
The upper thread is incorrectly
installed.
Correct the upper threading. page 20
The combination of fabric, thread and
needle is incorrect.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 30
The needle is bent or blunt. Replace the needle with a new one. page 31
The needle is incorrectly installed. Correctly install the needle. page 31
Dust has accumulated under the
needle plate or in the bobbin case.
Remove the needle plate cover and
clean the bobbin case.
page 95
A high-pitched
sound is
produced while
sewing.
A rattling noise is
produced.
Dust has accumulated in the feed
dogs or in the bobbin case.
Clean the bobbin case. page 95
The upper thread is incorrectly
installed.
Correct the upper threading. page 20
The bobbin case is scratched.
Replace the bobbin case.
Contact your dealer or the nearest
authorized service center.
A bobbin designed specifically for
this machine is not used.
Bobbins from older models, which
have a different thickness, will not
work properly. Only use a bobbin
designed specifically for this
machine.
page 15
Symptom Probable Cause Remedy Reference
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother JK7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother JK7000 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info