631248
59
Zoom out
Zoom in
Previous page
1/116
Next page
57
3
e
Position the fabric with the edge of the folded
hem against the guide of the presser foot, and
then lower the presser foot lever.
a Wrong side of fabric
b Fold of hem
c Presser foot guide
f
Press the “–” side of the stitch width key to
adjust the stitch width until the needle slightly
catches the fold of the hem, and then sew
with the edge of the fabric against the presser
foot guide.
a Needle
b Needle drop point
c Fold of hem
Memo
If the needle is incorrectly positioned, the
stitching results will be as shown below.
Correct each result as described below.
If the needle catches too much of the hem
fold
The needle is positioned too far to the left.
Press the “+” side of the stitch width key to
adjust the needle position so that the needle
slightly catches the fold of the hem.
a Wrong side of fabric
b Right side of fabric
If the needle does not catch the hem fold
The needle is positioned too far to the right.
Press the “–” side of the stitch width key to
adjust the needle position so that the needle
slightly catches the fold of the hem.
a Wrong side of fabric
b Right side of fabric
For details, refer to “Adjusting the stitch
length and width” (page 42).
g
Remove the basting stitching.
a Wrong side of fabric
b Right side of fabric
Slowly turn the handwheel toward you and
check that the needle does not touch the
presser foot. If the needle hits the presser
foot, the needle may bend or break.
R
c
b
a
R
b
a
c
CAUTION
ab
ab
ab
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother JK7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother JK7000 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info