Manual Brother Innov-is M280D (page 64 of 100) (English)

718769

Zoom out

Zoom in

1/100

Embroidering Preparation

Hooping the fabric in the embroidery frame

■ Attaching iron-on stabilizers (backing) to the

fabric

For best results in your embroidery projects, always use

stabilizer material for embroidery.

Press the iron-on stabilizer material to the wrong side

of the fabric.

• Use a piece of stabilizer which is larger than the

embroidery frame being used.

■ Inserting the Fabric

CAUTION

• Use fabrics with a thickness of less than 2 mm

(1/16 inch). Using fabrics thicker than 2 mm

(1/16 inch) may cause the needle to break.

• Always use a stabilizer material for embroidery

when embroidering stretch fabrics, lightweight

fabrics, fabrics with a coarse weave, or fabrics

which cause pattern shrinkage. Otherwise, the

needle may break and cause injury.

1 Fusible side of

stabilizer

2 Fabric (wrong side)

3 Size of the

embroidery frame

Memo

• When embroidering small pieces of fabric that cannot

be hooped on an embroidery frame, use stabilizer

material as a base. After lightly ironing the fabric to the

stabilizer material, hoop it in the embroidery frame. If

stabilizer material cannot be ironed onto the fabric,

attach it with a basting stitch. After completing the

embroidery, remove the stabilizer material carefully.

• When embroidering on thin fabrics such as organdy or

lawn, or on napped fabrics such as terry cloth or

corduroy, use water soluble stabilizer (sold separately)

for best results. The water soluble stabilizer material will

dissolve completely in water, giving the project a more

attractive finish.

• In the case of thick terry cloth towels we recommend

that you place a piece of water soluble stabilizer on the

top surface of the towel. This will help to reduce the nap

of the toweling and result in more attractive embroidery.

• When using fabrics that cannot be ironed (such as terry

cloth or fabrics that have loops which expand when

ironed) or in places where ironing is difficult, position the

stabilizer material under the fabric without fusing it, then

position the fabric and stabilizer in the embroidery

frame, or check with your authorized Brother dealer for

the correct stabilizer to use.

CAUTION

• If you use a frame that is too small, the presser

foot may strike the frame during embroidering

and cause injury or may damage your

machine.

Note

• If the fabric is not securely held in the embroidery frame,

the embroidery pattern will embroider out poorly. Insert

the fabric on a level surface, and gently pull the fabric

taut in the frame, being careful not to distort hooped

fabric.

1 Fabric

2 Stabilizer

3 Basting

bonjour
je dois faire des coutures au point droit à 5mm du bord. comment faire le réglage. Merci Submitted on 15-11-2022 at 10:03
Reply Report abuse
bonjour
je souhaite faire des coutures à 0.5 cm avec ma brother 280. Comment faire
Merci bonne journée Submitted on 3-9-2022 at 10:38
Reply Report abuse
message sur brother 280 lorsque la commande de vitesse est réglée pour contrôler la largeur du point zigzag, la touche marche/arrêt ne fonctionne pas. Comment faire pour annuler cette commande Merci de m'aider Submitted on 27-5-2022 at 07:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother Innov-is M280D in the language / languages: English as an attachment in your email.

The manual is 5,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Innov-is M280D

Brother Innov-is M280D User Manual - German - 100 pages

Brother Innov-is M280D User Manual - Dutch - 100 pages

Brother Innov-is M280D User Manual - French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother Innov-is M280D Manual

Product: